Aegis Legend Kit, Hit or Myth? - Woftam

I would like to thank Healthcabin for sending me the Aegis Legend Kit free of charge for review. Despite that I will give my honest opinion.

Packaging:
Pretty standard packaging for a Geekvape kit and as always loads of spare o-rings, extra seals and screws. In true Geekvape style they have never scrimped on the spares that they provide.

Contents:

Aegis Legend MOD
Aero Mesh Version Tank (4 ml Mesh Coil 0.2ohm pre-installed)
Extra glass tube (5 ml)
IM4 0.15-ohm coil head
User manual
Spare parts

Observations:

I am going to look at the included Aero Mesh Tank first up.

The Tank:

Aero Mesh Tank specs:
Size: 25 x 45 mm
Capacity: 4ml/5ml
Coil type: mesh coil 0.2 ohm (30-90 W) IM4 0.15 ohm (60-80 W)
Standard 510 thread

There are few nice innovations with this particular tank, however aside from these it is a pretty run of the mill affair which we are all fairly used to by now.

The top cap is not threaded on as per the norm. It has a locking mechanism which is fairly easy to operate with a simple quarter turn.

There is a trend at the moment with mesh coils and as you expect with a name like Aero Mesh, this tank has them.

They heat evenly and produce good flavour and clouds. I feel that the mesh coils produce a drier feeling vape. It appears I may be alone in this as I asked a few fellow reviewers that very question and the consensus among them was that they did not, nonetheless I still think they do. It may well be, as one of my good friends pointed out, I am just being a ‘dripping diva’. Despite my thoughts on the slightly drier vape I do still like this tank and as a subohm tank it does its job very well and is super easy to maintain. If sub ohm tanks are your thing, I would certainly buy the full legend kit.

The Mod:

The Aegis Legend Mod Specs:

Size: 90.5 x 58 x 30.6 mm
Maximum power output: 200 watts
Output modes: VW / VPC / TC / TCR / BYPASS / VPC
Resistance range: 0.05-3.0 ohms
Material: aluminium + zinc alloy + silicon
Batteries: 2x 18650 lithium ion cells (not included)
Temperature range: 100-315c / 200-600f
Protection ratings: IP67 waterproof and dust proof, MIL STD 810G-516.6 military grade shockproof\

The first Aegis was a big hit in my opinion due to it’s rugged nature, the perfect mod for the clumsy among us as it was virtually indestructible. The Legend follows in the same footsteps, with a few really well thought out changes. The upgrade to a dual battery configuration (allowing for a big boost in power) is probably the biggest and best of the changes, but there are a few other tweaks to the mod that are equally as welcome - and one maybe not ideal.

The ability to charge with a USB lead; while it was possible to charge the original with a lead it was a massive pita to do so - it involved removing the USB coverplate with a screw driver and removing a silicon gasket. With the Legend it is just a case of removing the rubber grommet that fills the USB port and sticking a lead in.

The Legend will hold a 30mm tank quite easily, but as you can see it will cover the rubber grommet at the front which will make it a little harder should you decide to use the USB charger.

I have to say that the new battery door doesn’t inspire much confidence from me. I liked the original - when I screwed the battery cover in, I was fairly sure that the o-ring and the thread would stop any moisture getting in. The new door is more of a traditional approach and while it has a seal around it, I have on two occasions had it open on me. Don’t get me wrong both times were a result of user error where the door wasn’t quite latched properly, mainly due to the fact that is is tight A/F for the first few battery changes. It has now loosened up a little and I find I don’t need two hands and the strength of a super hero to latch it. Which brings me to another point - it is easier to do up now, so will it continue to become easier and perhaps over time become a point of weakness and allow water ingress? Time will tell I guess.

The colour screen is nice and easy on the eye and has 3 different colours (fire button 3x then + and - for 1 sec to change between them)

There is also a screen lock which locks the settings but not the mod (+ and - for 1 second unlock is the same)

If you are familiar with the original, the other functions are pretty much the same.

While the temp control is present in all its usual forms TBH I don’t use it much and find the vape it gives is a little anaemic. This is the same for me with other TC mods, so I will assume that it is functional. I do notice that the 80w limit that was present on the original (after firmware update) is not present on the Legend. The power curve can, and does, give quite a nice vape once set up, as does the bypass.

Conclusion:
For the most part I really like what they have done with the Legend and I will continue to use the mod.

Pros & Cons:

Aero Tank Pros

  • Nice airflow
  • 810 resin drip tip
  • 510 drip tip converter
  • Easy release top cap
  • Nice flavour.
  • Well machined and clean out of the box

Aero Tank Cons

  • Fill holes could be just a touch bigger.

Legend Mod Pros

  • Easy to navigate
  • Comfortable in the hand
  • Water resistant
  • Dust resistant
  • Shock resistant
  • Usb charging if needed
  • Large easy to find fire button.
  • Battery Life is quite good (100w .12ohm I averaged around 150 hits)
  • Build quality

Legend Mod Cons

  • Battery door (not a huge one but I do question if it will hold up)
  • Screen Is a bit of a finger print magnet (what screen isn’t?)

Would I buy it?
I would most certainly buy the mod. I perhaps wouldn’t buy the kit, as the sub ohm tank really isn’t my thing. Don’t get me wrong the tank is very good, it is just not something I would use.

You can pick up the kit from Health cabin

or the mod

Don’t forget you can get it even cheaper at the moment

$5 off for orders over $50, code: hc905
$10 off for orders over $100, code: hc910
$20 off for orders over $200, code: hc920

In the meantime please feel free to hop on over to Steampugs to see how the Legend Kit compares to other vape gear currently on the market.

Vape Advocacy:

Please support Vape Advocacy – protect your right to vape.

http://notblowingsmoke.org/
http://casaa.org/
http://vaping.org/
https://gfn.net.co/dialogues/autumn2017/london
https://gfn.net.co/dialogues/autumn2017/durham
http://sfata.org/past-newsletters/
http://www.aph.gov.au/Parliamentary_Business/Committees/House/Health_Aged_Care_and_Sport/ElectronicCigarettes

Even though the target has been reached already please consider donating I am sure any excess would be put to good use.

10 Likes

Great review @woftam thanks mate.

5 Likes

Cheers @Tworrs I am really enjoying it (the mod more than the tank) but it is a really well put together bit of kit.
I am off to watch @SmilingOgre 's video now see what I missed in my review :grinning:

5 Likes

Great job! I learned a few things. Bravo!!!

5 Likes

Great review from the future, cheers :smile:

4 Likes

Well done @woftam!! Thanks for the good read :beers:

5 Likes

I can’t believe they didn’t do the mesh coils in SS. /facepalm

4 Likes

Ya a little bit of an oversight I think. It may be rectified in the future

4 Likes

From CosmicTruth over on ELR

Turn your Legend off and hold + and - keys, your MOD should show the Version of the Firmware. If it displays Version 1.00 2018 you will need to update your MOD to Version 1.1 2018 0611, or a better, newer, higher numbered version if available.

Update details for GB38 V 1.1 - 0611:

Fixed issues of Stealth mode, screen backlight does not turn off. And other screen backlit problems.
Corrected inaccurate battery display problem. Recalibrated to improve accuracy.
Increased Temperature control accuracy.
Automatic resistance detection frequency changed from every 0.5s to every 1s to reduce power consumption.
Added function: Factory reset function.
Any question, pls contact us support@geekvape.com

How to update the firmware? Pls check here:https://www.geekvape.com/firmware-download/ 3

I know the Geekvape/Digiflavor team is sorry for your inconvenience.

I would like to add

Just a little heads up when updating - push the start button on the software program 1x not 2x if you push it twice the update proceeds as normal and then the mod will appear to be bricked as in won’t turn on or function at all (don’t worry too much if you do it just hook it up again and push once it will complete as normal and work again) :sweat_smile:

5 Likes

Great review brother and thanks for pointing out the screen changes color, didn’t even know that, you are one thorough dude!

5 Likes

Cheers mate - I do like the mod and I feel much the same as you about the tank.

5 Likes

22 posts were split to a new topic: Problems with my Aegis Legend