Damn you @WickedFog, look what you made me do !!
11 Likes
Yeah, it has a large and small head.
11 Likes
So the WHOLE setup, TWO heads, shipped for a buck 35 ??
9 Likes
$135. Yeah, 3 days from New Jersey.
10 Likes
Thanks a lot for sharing that @SwaggyShane, and congrats on your FIRST recipe drop, @ The VC !!!
11 Likes
For the price it looks pretty good - if it does the job then everything is cool. After watching Walts review/demo of it the only issue I could see as a point of failure is the single bushing they used. I did find another video that shows the replacement of that bushing not sure if they give you spares or not.
I do have the large CG here and it is able to be handheld so that is a bit of a plus for it for me.
I also have a Kinematica Polytron PT 10-35 which works really well on big batches.
I picked up a massive bargain a little while back with a 30mm aggregate (it says used but it is still in the og box so I suspect it isn’t actually used)
RRP on this one is pretty steep
Thank you for ebay and someone not quite knowing what they had or what it was worth @$165 if if he had more i would buy em all
10 Likes
Yeah, it comes with spare bushings. I am going to see if I can source them locally. If not, I have a bunch of nylon and teflon and bronze scraps and a jewelers lathe. This wouldn’t be hard to modify.
10 Likes
Ya for sure - it probably wouldn’t be a huge task to make one up if needed either. It looks like a pretty nice buy.
10 Likes
Bastards! After clicking that link, I read
Shipping: Does not ship to Canada
SMH 
ebay
10 Likes
There are lots of those on there from various suppliers shipping from US warehouses.
10 Likes
Think this will do the job lol
8 Likes
Fuck me sideways that’s brutal 
9 Likes
That one is just EA and water but it certainly will get the job done i think
9 Likes
I’ll say 
7 Likes
The laugh at the end is the best part lol
9 Likes
After talking with @WickedFog and watching a couple of videos, curiosity got the better of me so I ordered one of these -
Excited to try it, and in keeping with 55 years of habitually jumping into things before reading instructions, I mixed up 60ml of my recipe Wedding Cake. No nic.
Put the mixing vessel on the homogenizer, with the head near the bottom. Turned it on and this happened -
After 45 seconds I realized, not much happening at the top of the vessel. So I adjusted where the end of the homogenizer head sits in the juice to be closer to the top. You can’t see where it is due to the froth, but it’s right about midway from the top of the liquid to the bottome of the container. Much more thorough now -
I will need to play with it some more to perfect the procedure. However, let me tell you…after mix I put the cylinder of frothed juice in the USC. After about 7 minutes it was clear as a bell. Put into a boston bottle, added my nic, gave a bit of a shake and tested it. Amazing. Even with my less than perfect approach, it still tastes as if it’s been steeping a good 10 days or so.
I also mixed a batch of my Peach Ice Cream. This one has LB Vanilla Ice Cream which needs 3 weeks to sit before it’s good. This turned out to be almost perfectly steeped.
More to follow, probably in another thread, but I wanted to share this machine (FSH-2A) is amazing for the price.
11 Likes
So it’s not quite vape mail yet…but my aromamizer plus V2 advanced kit has finally landed stateside, and with the money i saved buying it from efun i could afford to grab the single coil deck, full glass conversion kit, and some SS mesh from steamcrave’s site, they should arrive at my mailbox a day or so apart:)
11 Likes
Love the Evil Laugh at the end …lmao
10 Likes
I didn’t know about the advanced kit. So on Monday I did an impulse buy and ordered the basic. If I had researched first then definitely would have sought out the advanced. But only for the series deck which I’ll probably order from Steam Crave directly.
Lord, give me strength when I visit that site! Guide me to my intended purchase, and lead me not into temptation to obtain 1 of everything. Amen
12 Likes