themis
1 Like
I’m fairly certain that the deck had very similar to the Kylin wings (on the sides), but the center was different.
I dunno man, I’m almost starting to wonder if it wasn’t an oxy induced “creation”. sigh
3 Likes
I thought it was side airflow only (no bottom), rda style (no tank)…
So it is an rda not an rta?
My brain keeps saying Reload RTA but i dont think anyone has reviewed it. But if it is an rda im stumped.
I would say to you if the kylin mini is only half as good as a kylin then it will be a ripper since the kylin is a flavour beast.
2 Likes
I’m pretty sure… (or I posted in the wrong section because of my shit memory)
… Sometimes reading so much can be a bad thing it seems. Shit is evidently starting to blend together. (it pisses me off that I can’t remember, and I’m feeling like I’m looking like I’m off my damned rocker at the moment.)
3 Likes
Just at the moment?
4 Likes
@Steampugs has reviewed:
Digiflavor Drop RDA
Dead Rabbit RDA
Crius RDA
VLS RDA
Tobhino BF RDA
@mjag has reviewed:
Cthulhu Ceto Mesh RDA
iJoy Combo RDA
Condor BF RDA
Conspiracy RDA
Nudge RDA
Phobia RDA
@woftam has reviewed:
NCR RDA
I may have missed a couple?
2 Likes
reload rta is what kept coming to mind too, stumped as well for an RDA setup that way.
1 Like
There ya go, it is supposed to be anti leaking or something like that as well.
1 Like
Possible, but I doubt it. 
I’ve combed over everything (back to Dec) on both Steampugs, and ELR, and came up with nada. (Googled each RTA/RDA image just to make sure I didn’t miss or discount any).
Definitely appreciate the effort in playing “roundup” for me though! Thoughtful as ever love! 
Thank you sir!! That pic reminded me (I think), that I vaguely recall there being some kind of V or W fiddly bit in the middle… We’ll have to take a closer look at the Loop!
This might just come together yet!
2 Likes
After seeing the following picture:
It all snapped back in place!! WOOHOO 
I was being thrown by the “misleading” labeling of it being marketed as “bottom airflow”.
Granted, that’s absolutely, and undeniably correct, but not in the traditional sense (that’s been so ingrained after a couple years of design and reviews that mean the air inlets exist below the deck. >.< )
The following pic cemented where I went astray.
I was seeing the Geekvape Loop, and was wishing that they’d combine side airflow inlets from it (which is so similar to the Kylin), with the channel (sans holes) found on the Kylin Mini!! (Might as well wish for a liquid reservoir like the 22mm Wotofo Troll v2 while I’m at it, since it’s all a fucking pipe dream as it turns out. sighs and chuckles)
To me, that would be the ultimate single coil build deck and flavor machine!!
Thanks all for helping me solve what was gnawing at me. Especially given “how far out of left field” this had to have seemed*!
I appreciate your indulgence!
- = the Wotofo troll v2 bit was not in my original thinking, and only added above once I realized it wasn’t something in present production. One can dream right?
3 Likes
Hey @Mjag and @Steampugs (et al):
If one of you can use some pull to make this happen, I’d gladly take “payment” in 20-30 of said atties, and y’all can take credit for the rest (including naming!) LMAO
What do ya say? 
2 Likes
Appreciate the informed (read as: firsthand) experience! I couldn’t see it (just guessing by the design), but was rather dejected when mjag confirmed slight condensation when I inquired previously.
This might just be one of those I’ll have to reconsider.
2 Likes
My pleasure. My memory has quite a few holes in it too. Sounds like a great plan!!!
2 Likes
The only pull I have is the pud…oh wait, should I have shared that in public 
Imagine a Sprkslfly single coil designed RDA with a pug wearing a monocle for the logo…when do the preorders start 
5 Likes
Yeah, it is more like condensation you can’t get away from as the vapor has to settle somewhere. It has never been a problem for me either, just an occasional wipe is all.
4 Likes
Well. That didn’t take long.
Seems like Mike Vapes and I had the same idea!
Fucking EPIC!
5 Likes
You should have patented that idea! You’d be rich
2 Likes