Vapesourcing.com - New Arrival of Kits, Mods, Atomizers

[vapesourcing]

Is Fat Rabbit Tank A Perfect Match For Sigelei Humvee Mod?

Guys, good day! This time we’re gonna talk about a new DTL combination of a sub ohm tank and a box mod. The tank is the famous Fat Rabbit, while the mod is the Humvee 215. You can just give them a shot if you are looking for decent DTL devices.

We first look at the Hellvape Fat Rabbit which is made in collaboration with Vapin Heathen. Measuring 25mm at the base, it can fit with most mods without overhang. A threaded top fill system resides at the top, unscrewing to reveal two large fill ports. Underneath the threaded top cap is the first airflow control ring, allowing for airflow to enter and combine with the secondary airflow configuration to create intense flavor and boosts cloud production immensely.

Within the tank, the pyrex glass can hold up to 5mL of juice and can be changed out with the 2.0mL bubble replacement glass that is included. In addition, the Fat Rabbit can be used with a 0.15ohm and 0.2ohm single mesh and quad coil option respectively, offering a myriad of ways to enjoy vaping. Anyway, the Fat Rabbit is a promising sub-ohm vape tank for those that prefer the convenience of replaceable pre-built coils, eliminating the need for tools or build kits.

Then is the Sigelei Humvee Mod. It is made from Zinc Alloy, Aluminium Alloy and resin to be sturdy and solid. Despite being named after a rugged Military Off-road vehicle – the Humvee doesn’t appear to follow in the trend of being water, dust, and shockproof sadly.

Powered by dual 18650 batteries, it can fire from 5-215W and supports many working modes including Variable Wattage, Temperature Control (Ni, SS, Ti), TCR or TFR user modes. The whole device can be recharged at 2.5A via a Type-C USB port on the side. Finally, there is a 0.66 inch OLED screen weirdly mounted at an angle, it will show you the essential vaping data clearly. All in all, this combination is worth a shot.

[vapesourcing]

Innokin Zlide Tube Kit with Smart Coil Sensing

For those who love the Z-Coil lineup, Innokin Zlide Tube Kit is the most ideal vape pen kit, which is a 24mm pen style vaporizer specifically designed for use with Z-Coils. Constructed from zinc-alloy, the chassis of the Zlide Tube Kit is sturdy and impact resistant. It is powered by a 3000mAh rechargeable battery, compatible with the Innokin Z-Coil line, and is paired with the Innokin Zlide 4ml MTL Tank. The tank features a convenient retractable top fill design with a child safety locking top cap, and a single slot precision four airflow hole design that is perfect for MTL users. Plus the replaceable glass tank section and silicone seal, it maintains the same easy and clean coil replacement system you’ve come to love from the Zenith.

The Zlide Tube adopts a simple one-button design, it has only a single firing button, which doubles as a battery life indicator. With the smart coil csensing technology, the device will automatically determine the wattage output based on the currently installed coils. Any Z-Coil with a resistance greater than 1.0ohm will force the Zlide Tube to regulate itself to 13 watts, any Z-Coil less than 1.0ohm will force the Zlide Tube to regulate itself to 16 watts. No manual adjustments necessary, just simply press the fire button and vape away. What’s more, although the Zlide Tube comes with the new Zlide Tank, the Zenith can also be used.

Parameters:
Tank Capacity: 4ml
Diameter: 24mm
Resistance Range: 0.4 - 3.0ohm
Built-in Battery Capacity: 3000mAh
Max Wattage: 16W
Body Material: Stainless S teel
Thread Type: 510
Charging Current: 5V/1A

More information you can see Innokin Zlide Tube Kit 16W 3000mAh | Vapesourcing

You may also like:
geekvape zeus sub ohm tank

[vapesourcing]

Friends, Father’s Day in 2020 is coming, this Sunday, June 21. So are we going to buy some gifts to make him happy? As is the case every year, our Vapesourcing will select the largest father’s day vape sale and find the most favorable vape discount to save your expenses.

This page has done a lot of activities for vape gifts on Father’s Day. What are you waiting for? Let’s pick them together and let fathers receive an e-cigarette in their own festival. I believe they will be very happy, use the coupon code Dad10, you may get extra discount!

Other new arrivals we recommend
https://vapesourcing.com/voopoo-drag-x-pod-cartridge.html

Geekvape Wenax Stylus Pod System Kit 1100mAh

Related products you may focus on:
Vandy Vape Berserker BSKR V2 MTL RTA
lost vape centaurus dna250c

[vapesourcing]

Review: Vaporesso Target PM80 SE - like Vaporesso Target PM80?

Hello there! The Vaporesso Target PM80 SE Kit is Vaporesso’s pod system. It runs on a replaceable 18650 battery and has a black and white display. The AXON chipset supports three VV, VW, and smart operating modes with a maximum power of 80 watts.

Parameters

Vaporesso Target PM80 SE, spare cartridge, two evaporators, two blower inserts, charging cable, instructions. It is presented in 6 colors: blue, red, purple, black, green, silver. Equipped with an AXON Chip board with a maximum power of 80 watts.

Specifications

Output power: from 5 to 80 watts,

Used batteries: 1 * 18650,

Evaporator resistance: 0.2 \ 0.6 Ohm,

Tank volume: 4 ml,

Operating modes: VV, VW, Smart,

Maximum charge current: 1.6 A.

Features and Modes

The already familiar AXON Chip board is installed inside. Just note that for this mod, the display is horizontal.

Box mod

On the main screen we see information about the charge in percent, the resistance of the evaporator, the puff counter, the selected mode, power and the value of the recommended power for the selected resistance according to the manufacturer.

The Vaporesso kit is locked by pressing three times. Access to the menu is opened by holding plus and minus. Additionally, you can enable auto-tuning of power and reset the settings to the factory state. The board issues from 5 to 80 watts in increments of 0.5.

Cartridge

The cartridge has an airflow control system with silicone inserts. Coils from the GTX line are used for work, and a serviced base is also available. The cartridge vape pods used is the same as for the Target PM80 with a built-in battery.

Vape tank

You can also buy a suitable RBA base called GTX RBA Coil. The set consists of the base itself and the special stages necessary for the independent launch of a serviced evaporator. In general, the kit has everything you need to quickly launch the device.

Related vape tank we recommend:

smok alike usa

stick prince usa

What’s new for disposable pod kit:

MYLE Mini 2 Disposable Pod Device (1pc/pack)

[vapesourcing]

Today, we will introduce you to one of the most functional subsystems of the well-known Aspire company’s RBA-based BP60 Kit. Manufacturer Aspire is familiar with the vast majority of users in many of its devices, which are displayed in a variety of formats, from box mods to maintenance-free storage tanks and pod vape systems.

Features:
Dimensions: 99mm * 38mm * 23mm
Weight: 93g
Material: Aluminum Alloy + PCTG
Battery: 1400mAh
Charging: USB Type-C, 2A
Output Power: 1-60W
Display: 0.96”
Capacity: 5ml / 2ml
Evaporators: 0.6Ω, 0.3Ω, RBA

The development of the latter in Aspire has been actively developing recently. Recently, they announced a very complex new product BP60, we will further study its function in this article. The BP60 in its design clearly stands out from the competition, because the body of the device is endowed with five colors, among which there are both classic options and more colorful ones.

The device best pod vape is made of aluminum alloy in the case of the battery pack and of food-grade plastic PCTG in the case of cartridges. The dimensions of the new items can be called average, and the weight is 93g.

In an interesting way, engineers from Aspire approached the airflow control system. So, for these purposes, a special wheel with an air intake hole is provided in the side of the device, the rotation of which the user will be able to adjust the draft intensity, including the ability to adjust the cigarette puff.

In order to control the rich functions of BP60, an information display with a diagonal of 0.96 inches is provided on the front of the device, as well as physical power adjustment keys and fire alarm buttons. The power of the evaporator can be automatically activated when tightened, or by pressing the same “fire” button.

The maximum output power of the new Aspire vape product is 60W, but the device can choose the required voltage for itself according to the resistance of the evaporator. As for the battery, put a battery with a capacity of 1400mAh into the battery pack. The USB Type-C port with a maximum current of up to 2A is used for charging.

Other vape device you may like:
freemax autopod50
justfog minifit max

Other new products you may like:
https://vapesourcing.com/relx-nano-2.html
https://vapesourcing.com/aspire-bp60-kit.html
https://vapesourcing.com/dovpo-college-dna60-mod.html

[vapesourcing]

OVVIO X2 pod vape pen Kit review
Hello friends. Today is our fast day because it doesn’t even smell like a really interesting new product OVVIO X2 Pod Kit. Well, manufacturers have the right to legal rest, I really hope that the new week will bring us a high-profile release.

So far, we are satisfied with small companies-new advertisements provided by companies with few names, but they have visited our portal many times. We start with the new OVVIO brand, which specializes in the production of pods. Not long ago, the developers showed off their third device. I suggest taking a quick look at him.

Parameters
Dimensions: 106.6 x 19 x 11.5mm
Weight: 28.2g Case
material: metal + plastic
Power: built-in 350mAh
Cartridge capacity: 1.5ml
Evaporator resistance: 1.1Ω
Operating mode: POWER
Protection: against low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: no

The appearance of the novelty is modest, the most common - from the embellishment on the body, except that the brand logo, designed in the form of a colored LED indicator. Dimensions, as always, are not the smallest, but this fact is compensated by the thickness of the vape pen starter kit.

At the time of the start of sales, the development had prepared only three versions of the design - not a lot. The replacement cartridge is made of ceramic, although who cares - after all, it will be pre-refilled from the manufacturer.

Naturally there is no airflow adjustment. The manufacturer offers a good assortment of tastes, the vape liquid will be fixed with salt nicotine. Cartridge capacity is not the largest. Moreover, complete with the device there will be none. They are sold separately in a pack of four.

Tighten online vape shop activation - there are no buttons on the stick body. In the center, as I already said, the “stylishly designed” LED indicator of the charge level of the built-in battery flaunts. The latter can not boast of a special capacity, but the charging current was fastened to her fast - so a full cycle will take only about 45 minutes.

Related pod we recommend:
vape mag series
smok g-priv series

What’s new:
https://vapesourcing.com/voopoo-rta-pod.html
https://vapesourcing.com/lost-vape-btb-kit.html

[vapesourcing]

Vapefly tgo pod mod review - who is handsome with a fingerprint scanner
Today it turns out that the new products are rich and very interesting. However, let’s start with a mod pods , because for Vapefly , this is a large event. This is because it is the first such device in the manufacturer’s classification line, usually the second.

Parameters
Dimensions: 102 x 50 x 23mm
Case material: zinc alloy + plastic
Power: built-in 2300mAh
Chipset: 3S chip
Cartridge capacity: 4.5ml
Evaporator resistance: 0.3 / 0.6Ω
Output power: 5 - 70W
Voltage range: 1.2 - 4.2V
Operating mode: VW

The appearance of the novelty Vapefly TGO Pod Kit is very primitive-it is clear that the designer of the brand is superb and does not draw on the achievements of others. Perhaps the most expressive element is the “Fire” button-yes, it’s interesting, but it’s obvious that it can only be sharpened with the thumb, so in the smallest size compartment, its ergonomic design is not feasible at all.

At launch, the developers prepared up to seven design options. I must admit that even the variegated option looks pretty good. A removable cartridge of good capacity, it is refilled from above - the cover is movable - just press the button.

The filling hole is not the largest, it is covered with a slotted plug. The drip type is probably fixed. There is airflow adjustment, moreover, we have already met a similar solution - it was borrowed from vape online stop.

However, the manufacturer probably has a moral right, since it belongs to the same group of companies, although it denies it in every possible way in public. Two replaceable evaporators are offered; both of them are executed on a grid.

Related new kits we recommend:
https://vapesourcing.com/steam-crave-hadron-220-and-ragnar-kit.html
https://vapesourcing.com/aaavape-matrix-kit.html

[vapesourcing]

Smok new pods - Smok nfix & Smok rpm 2 kit
Hello, friends. Our 2020 best e-cigarette list lists several types of products, from the best vape and best pod vape to vape pen starter kit. Each product is clearly marked so that you know whether it is for smokers, beginners, people who are looking for big black clouds or others.

smok nfix pod kit
SMOK Nfix takes powerful portable vaping to a new level. Nfix is a 25W pod vape with 700mAh battery and 3mL pod capacity, which is an ideal portable kit. The ultra-smooth design measures only 110mm (h) x 21.5mm (w) x 13mm (d), and it will happily slide into the smallest pocket.

Nfix uses Type-C usb charging to fully charge the battery in 60 minutes, so you can spend less time charging and spend more time on e-cigarettes. On the front is a small OLED screen that can clearly display all data. Below the screen is the power button, which can also be used to adjust power.

The real star of the show is the Nfix pod with a capacity of 3mL. It is made of translucent PCTG and has four airflow inlets. The two airflow inlets on the side of the pod go down into the coil.

The other two on the other side of the Mod direct air to the bottom of the coil to enhance flavor and produce richer, fuller steam. Inside the pod there is a double 0.8 Ohm coil, which is designed as the ultimate MTL vape with the highest quality flavor.

The answers to all these questions are in this new buyer’s guide. Each product has a clear classification and description. We will keep these descriptions concise, so as not to make your search for the best e-cigarette too complicated. Take a look at the featured products, and then choose the product you think is best for you!

smok rpm 2 kit
The latest addition to the RPM range has a few features not seen before. In standard form the capacity of the pod is a huge 7ml, however in TPD regulated areas this capacity is reduced to 2ml. Refilling is taken care of via the side filling port.

Specs
Size: 28.5x31x108.5mm
Output: 1-80W
Battery: 2000mAh
Display: 1.14in TFT Colour screen
Resistance range: 0.15-3ohm
E-liquid capacity: 7ml (Standard) / 2ml (TPD)
Pods: Refillable, replaceable coil
Coil options: RPM and RPM 2 vape coil range
USB type C port with 1.4A charging rate

So a few new features but in essence this is an updated Smok new vape RPM80 with a slightly lower battery capacity and bigger screen.

The popularity of e-cigarettes means that vape kit have more choices than ever before. This is good news because it means that virtually every taste has e-cigarettes. These days, no matter what the carburetor is looking for, they can be easily found.

Related vape kits series you may prefer:
smok novo series
smok nord series

[vapesourcing]

Barz Disposable pod kit PS kangvape slick plus Disposable pod
See what all the buzz is about and try one of the Barz disposable (previously called Buzz bars). Each one comes pre-filled with a delicious flavor that’s meant to put a smile on your face. See what BUZZ is all about!

Specifications:
1.3 mL per e-cigarette
5% nicotine by weight
Approximately 250-300 puffs per pod
Made with salt nicotine
Pre-filled
280 mAh battery

Indulge in the carefully crafted flavors of BARZ Disposable Vape Device, storing 1.3mL of 50mg eJuice, an integrated 280mAh batter, and operates on draw-to-fire.

BUZZ is a compact, lightweight and portable new cutting-edge pre-filled disposable vape. Once used, all BUZZ disposable equipment does not need to be maintained, charged or refilled, just discarded. Each Buzz device comes with 5% (50 mg) of pre-packed e-juice, enough to keep you satisfied throughout the day.

kangvape slick plus
The Kangvape Slick Plus device is a pre-installed nicotine salt atomization system that is compact and can be carried around. Kangvape Slick Plus disposable vape has a 550mAh non-rechargeable internal battery, and the large-capacity battery supports longer vape time.

The launch mechanism is activated by inhalation, which is automatically activated when you inhale. Slick Plus Disposable comes pre-installed with 3.5ml of 50mg nicotine salt e-liquid. And every device equipped with 5% nicotine salt e-cigarette liquid can provide a smooth and satisfactory e-cigarette experience.

Each Slick Plus disposable device can use approximately 850 suction. Slick Plus Disposable has a variety of flavor options. This pull-out device is easy to use and convenient. No need to press any buttons or add anything. All this in one device ensures that both beginners and veterans will be satisfied. Just take it out of the package and you can start using the vape shop.

Related pod we recommend:
geekvape aegis max
geekvape aegis max mod

[vapesourcing]

Review: Joyetech eGo Pod Kit - Joyetech also has the pod vape
Hi, guys, we have a novelty, which is very hot. In Joyetech vape’s camp, one of the oldest and popular product lines of the eGo brand can recruit new people. The product line is known for its simple design, so it is designed for mass users. Usually, the representative of this family is a mild vape pen starter kit, although sometimes the original vape pen will also be missed.

Parameters
Dimensions: 98 x 19mm
Weight: 47g Body
Material: Stainless Steel + Plastic
Power: Built-in 1000mAh
Chipset: Avatar IC 1.0
Cartridge Capacity: 2.0ml Vaporizer
Resistance: 1.2Ω
Operating Mode: Power
Protection: low / high resistance, overheating, short circuit, overcharge / overdischarge
Connector type: magnetic

The novel appearance of Joyetech eGo pod vape refers to the classic styles of the series. These styles are sought after by most users and form an “unshakable” appearance. However, the equipment has now changed from a regular starter kit to a pod.

Only market trends have exact requirements for this. The modest nature of the design makes this device absolutely suitable for everyone. A removable cartridge of standard capacity, however, one must take into account the rather modest dimensions.

Bottom filling - there is a hole with a check valve - without any cover. The liquid level can be monitored using special windows. The vaporizer is built-in, of course it is designed for liquids with a high nicotine content.

As far as I understand, the airflow has a primitive adjustment by rotating the Joyetech ego pod cartridge 2ml inside the case. However, the manufacturer did not bother to give explanations on this matter. The main body is simple, I don’t know what. There are no buttons on it - activation occurs by tightening. But there is an “informative” LED indicator.

Naturally, there can be no talk of any power adjustment. If you would like to learn more details, you can click here in best vape online shop: https://vapesourcing.com/joyetech-ego-pod-kit.html

Related pod devices you may prefer:
https://vapesourcing.com/innokin-liftbox-bastion-mod.html
https://vapesourcing.com/innokin-endura-t18-2-kit.html

[vapesourcing]

Damn Vape Wotan Mesh Sub Ohm Tank review - brings DIY pleasure
Today, we take a look at the innovative Wotan Mesh Sub Ohm tank, which is an innovative maintenance-free vape tanks with interchangeable blowing options from the Chinese manufacturer Damn Vape vape.

Recently, the damn Vape announced this ordinary maintenance-free water tank at first glance, but at least gave him an innovative feature - Wotan Mesh Tank.

Features:
Height: 47.5mm
Diameter: 26mm
Material: SS
Drip types: 810
Capacity: 2ml / 5.5ml
Evaporators: Single Mesh 0.3Ω, Clapton Mesh 0.3Ω

The company’s Damn Vape’s position in the market, Veypinga, has established itself as a manufacturer of high-quality and smart devices, and it is a strong proof that it can be considered to have received positive feedback from the smoke atomizer Damn Vape Fresia RTA.

Wotan Mesh Sub Ohm Tank is a fairly large atomizer with an impressive 26mm diameter. The equipment is made of stainless steel and has so far only been produced in three main colors: black, steel and metal. Support 810 format drip type installation.

The key feature of the novelty is the evaporator blowing system, implemented in a way that is different from most devices of this format. So, through many small holes in the central part of the changer, the air flow will blow the surrounding winding 360 degrees, which, in theory, should improve the taste characteristics of the tank.

Among other things, the Wotan Mesh Sub Ohm Tank evaporators are endowed with the innovative ability to replace the previously mentioned central part with blowing, which has not previously been found in maintenance-free tanks.

In total, there are three types of these replacement parts, which are held inside the evaporators on one silicone seal. If you like this online vape tank, you can click here to learn more details:
https://vapesourcing.com/damn-vape-wotan-tank.html

Related new vape devices we display:
freemax m pro 2 tank price
freemax maxpod price

[vapesourcing]

asMODus Anani V2 MTL RTA - fix the bug and updated
Well, today is Friday again as usual, let’s talk about the asMODus brand today. You may remember the very suspicious ANANI MTL RTA cigarette holder. The day before, the manufacturer showed the second version - asMODus Anani V2 MTL RTA.

The asMODus vape developers honestly acknowledged all their mistakes and corrected them in the second edition. Moreover, it should be pointed out that the current output turned out to be the most common cigarette manufacturer/salt water (according to the same developer). In other words, we start with the “innovative” type, but still return to the origin. In terms of design, it is now the most trivial cigarette holder.

Parameters
Case material: stainless steel + plastic Atomizer
Type: RTA
Capacity: 2ml
Diameter: 22mm
Connector: 510, pin gold-plated

So, new features. First, the appearance-yes, it can still be identified-the same small face, the same plastic bulb. However, despite this, the new structure “marks” novelty as the existence of essential elements.

Among them-the ring used to adjust the airflow and the metal platform used for dripping. However, the most striking visual change is the reduction in diameter to 22mm.

By the way, the dispensing type itself has changed, but this is still the 510th. However, it is now located in a risky metal cover and secured by screw threads.

Yes, it’s just the cover-the design of the filler is not shown to us, but I’m sure there is no change there. By the way, it is possible that the smaller previous capacity was maintained due to the increase in the height of the fuel vape tanks.

But the deck has not changed at all. I don’t think they touched her at all, because I remember she was very small. In addition, the two frames can only fix one spiral correctly and wind it in a certain direction.

For bottom airflow, the same screen at the bottom of the deck should be used. The cotton well is very good. There are two holes at the bottom to replenish water.

Well, the last innovation is the airflow adjustment ring. In addition, the setting may be dotted, although the holes on it are quite good.

Oh yes-another difference-the set will now include a pre-wound spiral executed on the can tube. Allegedly, users also requested to do so. For more details, you can click here through vape shop: https://vapesourcing.com/asmodus-anani-v2-rta.html

Related new kits we recommend:
https://vapesourcing.com/suorin-air-ul-kit.html
https://vapesourcing.com/smok-mag-p3-mini-kit.html

[vapesourcing]

SMOK Mag P3 Mini kit review - mini version of SMOK Mag P3 Kit?
The MAG P3 MINI Smok uses the classic Mag P3 and adjusts it to a miniature size. Mag P3 Mini is equipped with a built-in 3000mAh battery, IP67 protection level, and includes SMOK TF storage tank. Mag P3 Mini has a military-grade IP67 waterproof and dust-proof structure, is equipped with an intelligent IQ-S chipset, and an ultra-fast launch speed of 0.001s, which perfectly matches the TF Sub Ohm tank.

Features
Smart IQ-S Chipset
Built-In Integrated 3000mAh Battery
Wattage Output Range: 1-100W
Output Voltage Range: 0.5-8.2V
Min Atomizer Resistance: 0.05ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
0.001s Firing Speed
Precision Memory Modes
Touch Screen Display – Ultra-Responsive
Input Keyboard – Password Protection Option
IP67 Waterproof & Dustproof Design
Oversized Firing Switch – Trigger-Like Design
Bottom-Loaded Hinged Battery Door

MAG P3 is the latest product of Smok Vape MAG series, adding more amazing features such as waterproof, dustproof and shockproof interior. The kit includes a rugged MAG P3 mod and an excellent TFV-Mini V2 tank, pre-installed with the new Mini-V2 S1 0.15 ohm coil.

Features:
Smart IQ-S Chipset
Dual High-Amp 18650 Battery - Not Included
Wattage Output Range: 1-230W
Output Voltage Range: 0.5-8.2V
0.001s Firing Speed
1.9" HD Touch Screen - Ultra-Responsive
Input Keyboard - Password Protection Option
IP67 Waterproof & Dustproof Design
Balance Charging
Battery Series Connection

Smok MAG P3 Kit is driven by dual 18650 batteries (not included) and smart IQ-M chipset, which can emit up to 230W of power at a flash speed of 0.001s. It also has a super-responsive 1.9-inch high-definition touch screen with an input keyboard that provides password protection to unlock the device.

Smok MAG P3 is a comprehensive vape that can meet all your needs. Is the new vape mini kit more popular than the former P3? If you would like to learn more details about Mag P3 Mini kit, you can click here in best online vape store: https://vapesourcing.com/smok-mag-p3-mini-kit.html

Other news you may prefer:
https://vapesourcing.com/hcigar-vt-inpod-kit.html
https://vapesourcing.com/obs-naze-kit.html

[vapesourcing]

Dovpo Odin 100 Mod review - with easy-to-read menu system
Hello, dear vapors. Today we recommend reading the next Box Mod in the Odin series performed by the Chinese manufacturer Dovpo. Before we have learn about the Dovpo Odin 60, and now Dovpo Odin 100 mod will also catch your eyes, right?

Specifications:
Dimensions: 36.3mm * 32mm * 90.5mm
Material: aluminum alloy + zinc alloy
Display: 0.96 ″ TFT
Battery: 18650/20700/21700
Charging: Type-C, 5V / 1A
Output wattage: 1-100W
Output voltage: 3.2-4.2V
Working resistance: 0.06-3.5Ω

Less than a year ago, the famous company Dovpo vape announced the release of a new product called Odin on the DNA250C board in the form of a box mod. Unsurprisingly, the device has an impressive price tag, which has been fixed in the next version of the device thanks to a simpler chip.

Later, a mini version of “Odin” was displayed on the DNA75C board, and recently continued to use the best vape mods without American electronic filling. The design of the Odin 100 is similar to the previous products in the series. The manufacturer offers 5 options with shell colors to choose from: gunmetal, matte black, red, black and stainless steel. This novelty is made of aluminum and zinc alloy.

To power the Odin 100, replaceable batteries in multiple formats will be used at once: 18650, 20700 and 21700. The adapter is compatible with younger types of batteries. The battery compartment cover is located at the bottom. It also supports charging the battery in the box mod with a current of up to 1A through a modern USB Type-C port.

In addition, there are 3 modes available: mass mode, TCR mode and bypass mode. In addition, it is equipped with a 0.96 inch TFT screen that can display your vaping detailed information and provide you with more convenient operation. Wish you a fresh vaping experience from Odin 100 in vape online.

Related pod we recommend:
https://vapesourcing.com/artery-nugget-kit.html
https://vapesourcing.com/xtra-disposable.html

[vapesourcing]

Review: Vaporesso XIRON Pod kit - who get the strong throat hit

And again, Vaporesso is on the front pages - after last year’s enchanting success, the guys churn out new items just right and left. And now they have arrived with another mod pod kit, moreover, it probably opens a new line of devices - Vaporesso XIRON.

Parameters
Dimensions: 92.95 x 46.48 x 27.8mm
Body material: zinc alloy + plastic
Power supply: built-in 1500mAh
Cartridge capacity: 2.0 / 5.5ml Vaporizer
resistance: 0.3 / 0.8Ω and others
Output power: 5 - 50W
Operating mode : VW
Protection:from low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: magnetic

The appearance of the Vaporesso mod novelty is quite stylish - made in accordance with modern trends, or something. The most noteworthy element of the decor is the overlay panel, stylized as the first letter of the model name.

Otherwise, futuristic inclinations can be traced, but the control panel definitely resembles something. The dimensions are quite decent, and the weight should not be expected too small, because the body is still made of metal.

At the time of the launch, the developers presented five versions of the design, three of them are the favorite gradient colors of fans. A removable cartridge of very impressive capacity, top filling, the level of the filled liquid can be tracked at the very least.

A noteworthy point is that the drip tip is removable, the landing net is 810, plus an additional copy in the box. And the design of the airflow adjustment again brings us back to certain thoughts - nevertheless, the designers clearly looked at the Aegis pod mod kit.

Related pods you may prefer:
buy ryse max
buy vandy vape pulse v2 mod

[vapesourcing]

Freemax Twister 30W Kit review - simple, versatile

Freemax vape company has acquired novelty - Twister 30W Freemax, and this is a continuation of the already familiar product line. Therefore, in the absence of unnecessary “nuns”, I suggest you get acquainted quickly.

Parameters

Dimensions: 78.3 x 22mm

Weight: 127.2g Body

Material: Stainless Steel + Plastic

Power: Built-in 1400mAh

Output Power: 7.5 - 30W

Voltage Range: 1.9 - 7.5V

Operating Mode: VW

Supported Resistance: 0.5 - 3.0Ω

Protection: from low / high resistance, from overheating, from short circuit, from overcharge / overdischarge

Connector type: steel 510, pin gold-plated, spring-loaded

Screen / diagonal: no

Fireluke 22 Vape Tank

Body material: stainless steel Atomizer

type: maintenance-free

Evaporator resistance: 0.5 / 1.0 / 1.5Ω

Capacity: 2 / 3.5ml

Diameter: 22mm

Height: 51.4 / 58.07mm with drip type

Connector: 510, pin gold plated

Weight: 48.3g

Sliding filling with child protection. The capacity is not the largest, but it can be a value due to the complete bubble glass. Here, of course, the dimensions must be taken into account - the diameter of the vape tanks best online nothing.

There are three types of replaceable evaporators, moreover, only two of them will be in the best vape mods near me. Adjustment of airflow with a standard rotary ring - point setting. The pipe mod is very simple, on top there is a 510th non-hybrid connector, and on the side there is a fire button with a built-in LED indicator.

The ring on the base is responsible for adjusting the power, and the tuning range is naturally small. The device is powered by a built-in battery that is not the largest capacity. Fortunately, at least the charging is relatively smart. The connectors used for these purposes have been fixed on the back of the module.

Other pod we recommend: https://vapesourcing.com/vaporesso-xros-kit.html

Related pods you may like:

uwell caliburn koko deutschland

juul starter kit deutschland

[vapesourcing]

THC Tauren Max RDTA review - filled with e-liquid through the side and bottom
Today I have a rare atomizer- RDTA. To be honest, I do not like these creatures, because for me they are neither this nor the same - not a drip, but not a tank either. However, I will naturally try to be objective, as always, by the way.

I agreed to this “adventure” only because the subject is released under the Thunderhead Creations brand. These guys are very smart and, it seems, have never made a frank slag - Tauren Max RDTA.

Parameters
Material: stainless steel Atomizer
Type: RDTA
Capacity: 2 / 4.5ml
Diameter: 25mm
Height: 41.5mm with drip / 34.2mm without drip, 47.7mm with drip / 40.4mm without drip
Connector: 510 , pin gold-plated
Weight: 64.1 / 68.2g

The appearance is as “sexy” as always-I think many people would agree with this. From novelty to novelty, THC’s developers can hardly do it-make a truly outstanding atomizer. Let the entire tauren production line have repeated/inherited decorative elements, but this is the purpose of the THC vape kit must have a recognizable company design style.

Simple design, no frills, but at the same time it is not attractive. The size of the accessory part is quite moderate, which is achieved especially due to the increased diameter. Drip tip, as usual, is an integral part of the decor.

Landing 810th, the material is acrylic, not the usual colors, at the base of the metal rim with the logo - all the chips by rank. In work, he showed himself excellently, the reason for everything is the special structure of the inner hole - there is a bevel and a side at the exit. However, its height is clearly too small, because the atomizer heats up decently, as, indeed, any drip.

Want more details - click on the link: https://vapesourcing.com/thc-tauren-max-rdta.html

Related atomizer you may prefer:
Vandy Vape Berserker BSKR V2 MTL RTA review
hellvape dead rabbit v2 rta review