SMOK Morph 2 Kit Is Coming | Will You But It?
Hey guys. Today let’s look at the latest Morph 2 Kit by SMOK. If you are looking for good Cyber Monday vape sales, you may consider this. Here we go!
SMOK Morph 2 Kit is an updated version of its predecessor SMOK Morph 219 Kit. Through a more comfortable operating experience, more powerful performance, with a new sub-ohm tank and a new mesh coil to optimize all aspects, is a highly comprehensive user- friendly device. SMOK Morph 2 Kit is composed of SMOK Morph 2 Mod and SMOK TFV18 Tank. Morph 2 is designed with zinc alloy to improve durability, while the soft leather covered on the surface has a comfortable touch. The front is decorated with a 0.96-inch display, control buttons, and charging port, and the fire button has been placed on the side. SMOK Morph 2 uses two 18650 batteries for operation. The dual 18650 battery has double battery life and sufficient power, creating conditions for immersive vaping. Through the USB Type-C port, you can run balanced charging at a maximum speed of 2.0A inside the mod, which not only extends the life of the battery but also shortens the charging time. Morph 2 is equipped with an IQ-S chip that not only provides a very fast 0.001 second firing time but also provides convenient functions such as password protection and customizable output modes (Power/TC) to support different vape styles.
The brand new TFV18 Sub-ohm Tank is connected to SMOK Morph 2 Mod via 510 thread. Boasting a colossal e-juice capacity of 7.5mL, the TFV18 allows you to vape all day with virtually no refilling. At the top is a resin drip tip and a small button to reveal the filling port. Simply press the button and push the top portion to the side to begin loading up your TFV18 tank with your favorite e-liquid. SMOK TFV18 Tank is compatible with the newly designed replaceable meshed coils: 0.33ohm TFV18 Meshed Coil and 0.15ohm TFV18 Dual Meshed Coil. The two atomizer coil heads are equipped with a mesh structure, which can provide a large area, produce a strong taste, and bring the best vapor generation effect. These two coils are included in the kit. The TFV16 Sub-Ohm tank promoted the base of the atomizer and has a bottom airflow control ring to improve the airflow cross-section. The draw resistance can be continuously adjusted from a limited DL draw to a fully open draw.
You may also like:
smok nord for sale
uwell crown pod cartridge
Hellvape Hellbeast RDA review - enough space for coil replacement
Hellvape Hellbeast RDA takes the rebuildable atomizer to a new level. The diameter of 24mm makes it possible to reserve enough construction space for dual coil construction. Hellvape Hellbeast RDA has a three-in-one stepped airflow design, so users can precisely adjust the air intake.
![[Image: hellvape_hellbeast_rda_atomizer.jpg]](https://vapesourcing.com/images/202011/hellvape_hellbeast_rda_atomizer.jpg)
Parameters
Size: 24mm(D) x 36.8mm(H)
Coil: Dual Coil
Material: Stainless Steel
Drip Tip: 810
Thread: 510 thread/BF Pin
The dislocation column design in Hellvape Hellbeast RDA also supports counterclockwise coil wicking and construction. Hellvape new kit Hellbeast has 72 air holes, so the air inlet will directly hit the coil. Hellvape Hellbeast RDA has an 810 wide dripper, which is most suitable for DTL vape experience. The bag also comes with a bottom feed pin, so it is compatible with most molds.
The airflow on the RDA vape tank also acts as an adjustable airflow based on the vaping style, with a huge airflow hole shown in one direction for DL vaping, and a small hole in the other direction to allow MTL vaping.
Other atomizers you may prefer:
augvape intake mtl rta in stock
gas mods pallas rta in stock
KRSP Ultra 1500 Puffs VS KRSP Ultra 2200 Puffs
Hey guys. This time let’s make a comparison between two cheap disposable vape kits by KRSP. They are with the same name but with different puffs. Here we go!
KRSP Ultra is a disposable vape with a robust throat hit and a super simple user experience. According to the number of puffs, KRSP Ultra disposable provides two types: 1500 puffs and 2200 puffs. This device belongs to the former. The KRSP Ultra 1500 Puffs Kit has a built-in 1000mAh battery, which provides a sufficient electricity guarantee for daily use. Each KRSP Ultra disposable 1500puffs device comes prefilled with a whopping 5ml of e-liquid.
This allows you to vape longer on a single disposable and makes the KRSP Ultra 1500 Puffs device a great option for traveling, extended road trips, or even just day-to-day use. It comes pre-filled with 5% (50mg) nicotine salt strength e-juice, get the great throat hit and pleasant draw. KRSP Ultra Disposable 1500 Puffs Kit requires no charging, filling, or swapping of pods. All you need to do is open the packaging, pull off the sealing strip, and puff away.
KRSP Ultra 2200 Puffs Kit is an upgraded version of the original KRSP Ultra 1500 Puffs disposable device, with a larger capacity battery, more puff counts, and pre-filled more e-liquid. Each KRSP Ultra 2200 Puffs disposable device comes pre-charged and pre-filled so they cannot be charged or filled up anymore. Each KRSP Ultra 2200 Puffs disposable device pod contains 6ml of a 5% nicotine formulation. The high nicotine content plays a huge role in suppressing the urge to smoke cigarettes for individuals trying to break the habit of smoking.
The KRSP Ultra 2200 Puffs disposable device gives you about 2200 puffs with its 1250mAh battery. This is 5-7 times more puffs per unit than the typical disposable. A fully charged battery that will last until you run out of vapor. Automatic drawing that beings releasing vapors as soon as you inhale. This enables the user to enjoy a flavorful vape with zero maintenance needed. All you need to do is use and dispose of. Moreover, the KRSP Ultra 2200 Puffs disposable pods are transparent to easy to check the e-liquid levels. Choose from 15 mouth-watering flavors that are all sure to tantalize your taste buds.
You may also like:
smok fetch mini acrylic
aegis hero vape price
New Release | Eleaf IORE 500 Disposable Vape Kit
Hey guys. This time I’m gonna introduce the latest disposable vape by Eleaf-IORE 500. Here are more details about it.
Eleaf IORE 500 Disposable Vape Kit is small, discreet, and ultra-portable. They come filled with 2.3ml of 5% nicotine salt. The throat hit from Eleaf IORE 500 disposable is on-point and the draw is a pleasant mouth to lung. The IORE 500 has a flattened mouthpiece and has no buttons. The whole unit is breath-activated. Users do not need to charge the device or fill the pods.
Eleaf IORE 500 disposable kit has a built-in 400mAh battery that can last for 500 puffs, making it equivalent to 30 regular sized tobacco cigarettes, but the service life of the device depends on the frequency of personal use. There is a small LED light that lights up when the device is in use. The coil inside the pod fires at a 1.4ohm resistance. The Eleaf IORE 500 is perfect for mouth-to-lung vapers. Eleaf IORE 500 disposable vape pod device is available in 10 flavors, most of which are pure fruit flavors. Try different flavors and enjoy a simple and wonderful vape.
You may also like:
novo 3 pods
valyrian pod coils
SMOK Morph 2 Vape Mod - mod operation more convenient
Well, for snacks, we have another flagship product from Smok - SMOK Morph 2 Mod. Moreover, the most interesting thing about it is not so many box mods, but a new revision to the once-legendary TFV series out of service.
Parameters
Dimensions: 88 x 47.5 x 31.7mm
Weight: 133.5g Body
material: zinc alloy + plastic + leather
Power supply: 2 x 18650
Chipset: IQ-S
Output power: 1 - 230W
Voltage range: 1.2 - 8.2V
Operating mode : VW, TC (NI200, SS, TI)
Temperature range: 200 ℉ - 600 ℉ / 100 ℃ - 315 ℃
Supported resistance: 0.1 - 2.5Ω / TC 0.05 - 2.0Ω
In my opinion, the Vape mod is very simple. No complicated form, pretentious design-the most ordinary, most diligent middle peasant. Artificial leather is used for decoration, and, as always, provides good colors. Although the thickness of the mod is good, its size cannot be large.
The space here for Smok vape mod is divided by a color display of a standard diagonal, a pair of setting keys and a new type of connector for charging the battery, oriented for some reason in a vertical plane. The charging current, by the way, is unexpectedly fast, although two cans are still.
Related mods you may prefer:
smok rigel mod for sale
mag p3 mod for sale
Hugo Vapor Supro 3 Disposable Kit - larger than many box mod tanks
Hugo Vapor Supro 3 Disposable Kit is based on the third iteration of the original Supro disposable device. The Hugo Vapor Supro 3 disposable device increases the battery capacity to 900mAh, supporting longer usage time.
A large 900 mAh battery is hung on the disposable device to ensure that large jars of salt are not wasted. The coil in the pod ignites with a resistance of 1.7 ohms. Hugo Vapor vape Supro 3 has no buttons. Instead, they are drawing active.
You just need to breathe in the mouthpiece to start atomization. The airflow on the Supro 3 disposable device is also obvious-a nice MTL pump with a smooth but satisfying throat blow. Hugo Vapor Supro 3 disposable vape products are available in 6 different flavors. If you are a fruit e-juice lover, you will love these options.
Related pod vape styles you may prefer:
vabar plus near me
eleaf iore near me
Complete Guide To OBS Pluck Pod Mod Kit
Hey guys. Do you like the vape devices by OBS? Today we’ll be covering their Pluck Kit which is their latest pod mod to date. Here we go.
OBS Pluck is a small and intelligent starter kit with a compact mod and maintenance-free tank, suitable for MTL & RDL vaping. Constructed with durable zinc-alloy and leather, the OBS Pluck takes on an ergonomic, cylinder design that promotes a firm grip every time you vape. Pluck kit has a simple control panel, and the long style fire button occupies the entire front. On its upper part, there is a small LED indicator. The LED light shows 3 battery power indications when vaping with Pluck Kit, which could let you know Pluck battery life more clearly. The Pluck is powered by an internal 1500mAh battery that you can charge up quickly due to the device’s 5V/1A quick-charging capability via the USB Type-C charging port.
On the top of the mod is a 3.5mL tank, which consists of a transparent pod cartridge and an atomizer 510 base with an air ring. The Pluck tank is connected to mod through the 510 connector. Pluck Pod has an integrated proprietary drip tip, which can be slid back and forth through the top filling system to expose the filling port and close firmly. Included with the OBS Pluck Kit are two OM coils and replacements are readily available. Perfect for RDL (restricted direct lung) and MTL (mouth to lung) vaping. Rotate the airflow ring at the bottom of the OBS Pluck tank to adjust the amount of airflow for a tighter or looser inhale.
You may also like:
scar 18 vape
vaporesso x iron review
[Big promotion is back] Cyber Monday Sale 2020 in Vapesourcing
Hi, guys. Did you enjoy shopping on Black Friday? At the beginning of December, we have a Cyber Monday vape sale return event on 01.12-06.12, you can have a 12% discount with the vape coupons code RE12 at vapesouricng.
TIPS
Time: 10:00am-10:00 pm, 1st - 6th DEC.
2. Must Log in.
3. Wait till the sales begin and enter the product page.
4. Click “Buy Now” button then checkout and finish the payment.
5. Please note that the flash sale items are based on payment time.
USA and EU wholesale are also have the 12% discount, what are you waiting for, grab the opportunity to snap up! You can click here to learn more details: https://vapesourcing.com/black-friday-cyber-monday-sale.html
Related pages you may prefer:
europe warehouse for sale
us warehouse for sale
Eleaf GTL Pod Tank Preview | Better Than VOOPOO PNP Pod Tank?
Hey guys. Today let’s look at the latest GTL Pod Tank by Eleaf. If you like the VOOPOO PNP Pod Tank, then maybe also wanna try this one.
Eleaf GTL Pod Tank is a pod tank that fits all. It is both a refillable pod and a tank compatible with the regular 510 thread box mod. The Eleaf GTL Pod Tank has a simple appearance. The upper part is a transparent refillable pod cartridge made of PCTG, which is quickly magnetized to the metal base through a standard 510 connector. The drip tip is naturally integrated into the GTL Pod Tank, available in 4.5ml and 2ml versions, and both gunmetal and silver options are available.
Adding e-liquid to your GTL Pod Tank is easy; just remove the upper pod of the tank from the 510 base, refill it through the silicon-sealed filling port, and put it back in place. One for all! Sharing the same base that features a dual airflow system. Airflow adjustment is the possible-the bottom of the standard rotating ring is slotted. Moreover, it is performed on both MTL (five dot hole) and DL (one solid hole). The new GTL Pod Tank satisfies all your needs of DL/RDL/MTL vaping with its GTL 0.4ohm/0.8ohm/1.2ohm coils.
You may also like:
cheap luxe pm40
forz tx80 for sale
New Arrival-Pod Twist 2500 Disposable Vape Kit
Hey guys. Have you ever used the Pod Twist disposable vapes? This time I’m gonna introduce their 2500 puffs kit. Let’s dive in for more details.
Pod Twist 2500 Disposable Vape allows users to easily enjoy the e-cigarette experience and satisfactory nicotine content need. With a slim cylindrical pen body and a flat cigarette holder. Pod Twist 2500 disposable vape can provide more airflow and battery life, integrate a 1000mAh battery to ensure vaping all day, and it has an actual tank inside that holds the premium e-liquid providing better flavor and vaping production. The Pod Twist 2500 disposable device is pre-installed with 6.5ml of e-liquid, which has a higher capacity than most tanks on the market.
Because of its one-time use, no troublesome refills are required to maintain the continuity of taste. This disposable device provides 5.5% Nic Salt of your favorite flavor. Each device can provide about 2500 puffs before disposal and also supports airflow adjustment. This is unprecedented in disposable products. The bottom of the device is equipped with an adjustable airflow control ring, allowing users to adjust the airflow to the desired setting. A compact, high-performance long-lasting disposable vape!
You may also like:
bang xxl disposable
thelema pod mod
Review: Rincoe Jellybox Mini kit - more spectacular in small fashion
Now, we will be familiar with a fundamentally different box mod, but similar in design. In my opinion, this will be more promising than the previous one. Well complete Jelly tank we are already familiar, we will not dwell on it. Moreover, there is probably nothing interesting in Rincoe Jellybox Mini 80W kit.
Parameters
Dimensions: 95 x 44.3 x 28mm
Weight: unknown
Body material: zinc alloy + plastic
Power supply: 1 x 18650/20700/21700
Output power: 1 - 80W
Voltage range: up to 4.2V Peak
Operating mode : VW, TC (NI200, SS, TI)
Temperature range: 200 ℉ - 600 ℉ / 100 ℃ - 315 ℃
Supported resistance: from 0.1Ω (likely)
Protection: low / high resistance, overheating, short circuit, reverse polarity, overcharge / overdischarge
Connector type: steel 510, pin gold-plated, spring loaded
Screen / diagonal: color
The design of the box mod is familiar - it is again a game on the contrast of metal and plastic. Moreover, I would like to note that this technique looks much more spectacular in small fashion. Dimensions, probably, should be called average, but in height our guest is still a decent “tower”.
The charging connector of this pod mod kit is on the adjacent end, it is already a new model, and the charging current was added to it quite smart.The functionality is not far from the older brother - on board there is only thermal control, and varivatt, moreover, the maximum power value of the latter is pretty cut.
Other vape kits you may like:
innokin kroma z kit for sale
smok nfix mate kit for sale
Rincoe Jellybox kit review - provides simplicity and comfort
Today is the finest hour of the Rincoe brand. They presented two new items at once, and the most gratifying thing is that these are two box mods, or rather, even sets. I decided to start, it seems to me, with a less interesting new vape kit - Rincoe Jellybox 228W kit.
Parameters
Dimensions: 92 x 54 x 27mm
Body material: zinc alloy + plastic
Power supply: 2 x 18650
Output power: 1 - 228W
Voltage range: up to 8.4V Peak
current: 50A
Operating mode: VW, TC (NI200, SS, TI)
Temperature range: 200 ℉ - 600 ℉ / 100 ℃ - 315 ℃
Supported resistance: 0.08 - 5.0Ω / TC 0.05 - 3.5Ω
Protection: low / high resistance, overheating , from short circuit, from wrong polarity, from overcharge / overdischarge
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: color
Micro-USB port / charging: Type-C, charging current 2A
The complete vape tank looks simple, the body is made of plastic, while the base is already made of metal. The drip type is integrated, the capacity is impressive, but the dimensions are not small either. The filling is lower, moreover, in this case, the atomizer looks more like a cartridge from the hearth.
The Rincoe Jellybox box mod is original. They decided to play the decor on the contrast of plastic and metal, while it turned out to be quite watchable. Moreover, the plastic in all offered versions, without exception, is transparent, therefore, all “guts” are out. Dimensions are not small - in such a case, and 21700 could fit if desired.
Other vape kits you may like:
vaporesso luxe 2 for sale
vaporesso luxe 2 mod for sale
First Look | SMOK Rigel Mini Kit 80W
Hey guys. Do you like the Rigel kit or mod by SMOK? This time we’ll be covering the mini version of it-Rigel Mini Kit. Here we go!
SMOK Rigel Mini Kit is a miniature version of the original Rigel 230W. It inherits the advantages and outstanding functions of Rigel while becoming slim and lightweight, and its performance meets the needs. It is not only reflected in the reduction of the mod size but also matches the lighter and smaller TFV9 Mini tank. In terms of appearance, the original color scheme is retained, and it is made of durable zinc alloy, with an amazing texture. The outer layer is made of soft rubber coating, and it feels comfortable when holding Rigel Mini.
The Rigel Mini Kit requires a single external 18650 battery to provide continuous power. It uses Type-C for fast charging, thereby minimizing downtime, and the output current is as high as 1.4A. Using the brand’s legendary chipset technology, consistent and reliable multiple functions can be achieved. The power range of 1-80W allows you to enjoy the most satisfying clouds and flavors throughout the day according to your power preferences. There are a comprehensive 0.96 inch TFT color display and navigation buttons on the device, allowing you to easily customize the settings.
As for the TFV9 Mini Tank, its diameter is 23mm, lighter and smaller, and the e-liquid capacity is 3ml. Outfitted with a sliding top fill system, the TFV9 Mini Tank can refill via a single fill port. It uses a locking, twisting child-proof top cover to improve safety. The locking mechanism of the top cover adopts lifting and opening methods to keep children away from the water tank. This design can also effectively prevent accidental opening of the top cover and leakage of e-liquid. In addition, the TFV9 Mini tank has redesigned the airflow system, which can adjust the amount of air intake by rotating the airflow ring, allowing you to control the tightness of each draw. Compatible with V9 mesh coil and V8 Baby Q2 coil, can bring excellent vapor and aroma.
You may also like:
voopoo drag s للبيع
thallo vape
Freemax Maxus 50W Kit Preview - has ultra-fast firing speed
A new kit from the Freemax brand closes the news feed. It was another copy of the Maxus line, moreover, the Freemax Maxus 50W turned out to be the most compact of the whole trio. However, it turned out to be very simple, in fact, therefore, I will not detain you for long.
Parameters
Dimensions: 74.6 x 38.6 x 21.7mm
Body material: zinc alloy + resin
Power supply: built-in 2000mAh
Chipset: FM chip
Output power: 5 - 50W
Voltage range: 0.5 - 8.0V
Operating mode: VW, TC ( NI200, SS, TI), TCR, VPC
Temperature range: 200 ℉ - 600 ℉ / 100 ℃ - 315 ℃
Supported resistance:0.1 - 3.0Ω
To begin, as usual, this is a new vape atomizer of the Fireluke line, by the way, also the smallest one. Drip type 510 landing, made of resin. Top filling - under the slide lid you can see not a small filling hole. The capacity is not decent, although the diameter is small.
A whole heap of replaceable evaporators is offered, but traditionally only two of them will be included in the kit. Airflow adjustment is provided - a rotating ring at the base of the tank.
The vape mod is made in the corporate style of the line - the zinc alloy case is “decorated” with colorful resin inserts. The dimensions are naturally small, after all, the built-in battery allows you to experiment with this parameter.
Related pod mod kits you may prefer:
smok rigel mini kit release date
smok rigel mini mod release date
New Arrival-Geekvape Aegis Boost LE Bonus Kit
Hey guys. Today let’s check out the Boost LE Bonus Kit by Geekvape. It is a new variant of the original Aegis Boost, just give it a shot if you like.
Geekvape Aegis Boost LE Bonus Kit is the Aegis Boost’s Luxury Edition that includes 5 Geekvape B Series Coils in the package to bring you more powerful vaping enjoyment. It is built with a 1500mAh battery with 40W max output. With the construction of zinc alloy, top grain leather, and food-grade silicone, it is stain-resistant, tear-resistant, and water-proof.
What’s more, Aegis Boost LE Bonus Kit can support Aegis Boost cartridge or RDTA and provide MTL or DTL vaping. It has a 3.7ml e-juice capacity and comes with an easy top filling system. Aegis Boost LE Bonus Kit is engineered for maximum comfort and ease, so it comes with some innovative designs: easy access airflow valve design, easy access top-refill pod design, quick lock & release design. May it offer you amazing vaping!
You may also like:
vapetasia salts
ezzy super vape
Review: Advken Potento X Kit - with different resistance values
Today, we talk about this subsystem from varivoltom Advken company, the company’s name is - Advken Potento X. The well-known e-cigarette device manufacturer Advken has launched a sequel to its previously released Potento Pod.
Features:
Dimensions: 40mm * 74.4mm * 14.5mm
Weight: 40.6g
Material: aluminum alloy + PCTG
Battery: 950mAh
Charging: USB Type-C
Output voltage: 3.2 ~ 4.2V
Cartridge capacity: 2.5ml
Evaporators: Mesh Coil 1.0Ω / 1.2Ω
Different from the previous version, the novelty lies in the use of a square housing, but retains the main function of the series-potentiometer. Advken vape Potento X Pod currently offers four basic colors: black, blue, red and gray.
The device has a compact size and is packaged in a square casing, and aluminum alloy is used as the manufacturing material. By the way, the cartridge of the device is made of PCTG plastic. As for the vape pod cartridges, they are equipped with non-replaceable mesh evaporators of two types of resistance: 1.0Ω and 1.2Ω. The capacity of the liquid reservoir reaches 2.5 ml.
Related pod kits you may prefer:
innokin endura m18 kit usa
uwell whirl 2 kit usa
Complete Guide To Yuoto Pro Disposable Pod Kit
Hey guys. Today let’s look at a new disposable vape named Yuoto Pro. If you are looking for a good Christmas Vape Sale 2020, then this may be worth a shot.
Yuoto Pro Disposable Kit is specially designed to be a disposable device for casual vaping, with portable size and a comfortable hand feel, and pre-filled with a variety of flavors. Made of PCTG material, they’re also small and light so it’s easy to slip them into your pocket. It is suitable for business parties, clubs, bars, travel, and other occasions. Yuoto Pro disposable is powered by a 560mAh built-in battery, and despite its small size, it can support up to 1000 puffs.
Yuoto Pro disposable kit is draw-activated and delivers a pleasant, smooth, and satisfying draw. Each Yuoto Pro comes pre-installed with up to 3.5ml of e-liquid filled with a nicotine salt formulation. This allows you to vape longer on a single disposable, which can satisfy your daily use. Yuoto Pro disposable kit uses a flat cigarette holder design. In-depth user usage habits, combined with ergonomics, it fits the lips perfectly. It has 6 device housing colors and 8 flavors. Each taste is unique and fits the actual taste very well.
You may also like:
ezzy oval for sale
xtra twist price
Is Wotofo Profile M RTA Worth Buying?
Hey guys. Do you like the vape atomizers by Wotofo? This time we’ll be covering their Profile M RTA, don’t miss out on it if you like. For a decent Christmas Vape Deal, you can check vapesourcing online store.
Wotofo Profile M RTA not only attracts minimalists with its straight, classic, elegant design but also one of the most compact Mesh RTA. The height is 27.8mm (without drip tip and 510 pin), the diameter is 24.5mm, and the top ring has high-quality logo engraving. The stylish 810 drip tip is located on the easy-to-use push-open style top cap, and the liquid filling hole is hidden under the top cap. There are two tank glass tubes to choose from. The standard glass tube has a capacity of 3.1ml, while the spare PCTG bubble glass tube has a capacity of 4.0ml. Use push-open style top cap to fill e-juice quickly and cleanly from above.
The Profile M RTA adopts a postless build deck with an open fixture structure that ensures easy installation of mesh coil. It can utilize single coil and mesh sheet coils, side secured via Phillips screws, and is also compatible with nexMESH series steel mesh which is suitable for Profile and Profile Unity. More importantly, it has a well-designed top airflow system. The air passes through the continuously adjustable top AFC. With a porous honeycomb air outlet, this makes the Profile M RTA almost completely leak-proof. In this way, the air can flow perfectly and evenly in the mesh hole, and force the flavor and vapor to be produced.
You may also like:
novo 2 pods in stock
aegis x precio
1 Like
DOVPO RIVA DNA250C Box Mod - control every aspect of output
The DOVPO RIVA DNA250C Box Mod has a DNA250C chipset with an output range of 1-200W, and includes a temperature kit for controlling steam output. The chassis is made of aluminum alloy and CNC machined to form a perfect accessory, with very small defects and spacing.
Features:
Evolv’s DNA250C Chipset
Dimensions - 80mm by
Dual High-Amp 18650 Batteries - Not Included
Wattage Output Range: 1-200W
Voltage Output Range: 1-8V
Resistance Range - VW Mode: 0.1-2.0ohms
Resistance Range - TC Mode: 0.08-1.0ohm
Temperature Range: 200°-600°F / 100°-315°C
Power Mode
TC Mode
TCR Mode
RIVA Mod is supported by Evolv’s DNA250C chipset, which enables precise temperature control to achieve controllable steam output. The DOVPO Riva Mod is installed behind the hinged battery door at the bottom and can accommodate two high-current 18650 batteries not included to provide up to 200W of power.
Equipped with a wide range of temperature control kits, RIVA vape mod is compatible with stainless steel, nickel and titanium wires, suitable for users who wish to build and control all aspects of output in a vape.
Related mods you may prefer:
vandy vape gaur-21 price
lost vape grus 100w price
1 Like
Innokin EQ FLTR Pod - not harmful to the environment
Innokin recently demonstrated its newly developed product-the pod system - Innokin EQ FLTR Kit. Everything is fine, but it uses replaceable filters instead of drip filters to achieve the maximum authenticity of ordinary cigarettes.
Parameters
Dimensions: 90.9 / 78.1 x 16.8mm
Body material: plastic
Power supply: built-in 400mAh
Cartridge capacity: 2.0ml Vaporizer
resistance:1.2Ω
Output power: 7 - 9.5W
Operating mode: Power
Protection: low / high resistance, overheating, short circuit, overcharge / overdischarge
Connector type: magnetic
Screen / diagonal: no
In appearance, our visitors look like HNB devices-well, you know-the same as Iqos, but, in reality, it is still just a vape kits. If you don’t understand anything-it doesn’t matter-I also slowed down for a long time at first, and we will solve it together.
One or more pod replaceable cartridges have standard capacity, side filling function, and directly have a device with a window for fluid control. As far as I understand, they are different from each other on the evaporator-built in in one case and replaceable in the other. We are already familiar with the second copy-it is borrowed from the Scepter pod-MTL 1.2 ohms.
Other vape kits you may like:
innokin endura m18 kit review
innokin kroma z kit review