Is Vaporesso GTX Tank 18 Worth Buying?
In this article, we’ll be covering the GTX Tank 18 by Vaporesso. You may like it if you are looking for a reliable atomizer for MTL or RDL vaping, let’s learn more about it.
Vaporesso GTX Tank 18 is quite small, and surprisingly it’s able to hold 2ml or 3ml of e-liquid. It’ll hold that maximum amount with the pre-installed bubble glass tank section. If you don’t like this look, you can always opt for the straight glass. For me, I’d stick with the bubble tank and the extra 1ml of vape juice. Inside the box, you’ll get two coils in total. One, which is pre-installed, is the 0.8ohm mesh. The other is a 1.2ohm mesh. The filling is quite easy, as the top cap comes off completely.
There’s plenty of room for any type of bottle you might be using. Adjusting the bottom airflow is simple as well. It stops when either fully opened or fully closed, making it even easier to take apart. The coil replacement is a breeze too as it uses a plug-and-play coil system. We’ve seen this in many sub ohm tanks, so we’re glad Vaporesso went this route. The included delrin drip tip is comfortable, and best suited for mouth to lung vaping with its narrow bore. It doesn’t get hot while vaping either - an added bonus.
You may also like: beli smok novo 2 kit
What Are The Selling Points Of FreeMax GEMM 25W Kit?
In this article, we’ll be covering the Gemm 25W Kit by Freemax. If you’re looking for a unique pod mod kit that offers multiple vaping experiences, then you’ll definitely want to check it out.
Freemax Gemm 25W Kit looks fairly similar to the original Freemax Gemm 80W Kit but differs quite a bit. Like the original, it looks just like a vape pen. However, this new kit shares more similarities to a pod vape. Included, you’ll get both the Freemax Gemm Pod Mod and two pods or tank cartridges. Let’s cover the device first. It packs a large 1,300mAh built-in battery, and charges via micro USB. Additionally, it has a maximum wattage output of 25w. You’re able to adjust the wattage too, between three different power levels. Simply click on the fire button three times and it’ll switch. There are two LED light indicators on the pod mod, one for the battery and the other to show you the power output mode.
As mentioned earlier, there are two pod cartridges included, and each will provide a different vape. Firstly, you’ll get the 0.5ohm pod, which is designed for DTL or direct to lung vaping. Secondly, there’s the 1.0ohm cartridge, which can be used for mouth to lung vaping. Airflow is adjustable as well on these pods, which is always a good feature to have. Each pod does have a 2ml e-liquid capacity, and rated to be filled between 10 or 20 times! That’s a ton of usage from each Freemax Gemm pod cartridge. Lastly, the coils inside of the cartridges are SS904L mesh, and wicked with tea fiber cotton, ensuring maximum flavor.
You may also like: harga harga vinci x
What Are The Features Of IJOY Captain 1500 Kit?
Hey guys. Pod mod kits are currently very popular in the market. This time we’ll be covering the Captain 1500 Kit by IJOY, you may try it if you like. Here we go!
IJOY Captain 1500 Kit has a modern and elegant appearance that combines metallic-feeling plastic with a leather grip to maximize ergonomics. Technically, the IJOY Captain 1500 Kit utilizes an internal 1500mAh battery which permits up to 40W of output for endless vaping without a recharge. Several safety protections include overtime, overcharge, high temperature, output over-current, short circuit, low battery, and max power protections. On the control face, there is an exclusive full-color display screen with a vertical menu that is convenient.
With purchase, there is a 5mL cartridge included that has an effortless side-fill system and is transparent so you may see if it is time for a refill. The two coils you will get to start vaping the IJOY Captain 1500 are a C150.3ohm mesh coil that is pre-installed and ideal for sub-ohm vaping. Or, utilize the C15D 0.7ohm coil that is a great head to use with nicotine salts, but perhaps not over 10mG strength. An IJOY RBA head for the Captain 1500 is also set to be released, but that you must buy separately.
You may also like: beli spesifikasi voopoo navi
Complete Guide To The DOVPO Blotto Mini RTA
In this article, we’ll be covering the Blotto Mini RTA by DOVPO. I think it will be a good choice if you are looking for a reliable RTA vape for more DIY fun. Ok, let’s dive down.
DOVPO Blotto Mini RTA is a smaller version of the original Blotto RTA. Firstly, this tank atomizer has an overall diameter of 23.4mm. As expected, it is primarily constructed out of stainless steel material and features the signature Vaping Bogan logo you saw on the original. When it comes to e-liquid, it has a maximum capacity of 2ml or 4ml with bubble glass. Both tank sections are included plus an additional PCTG tank, providing a “frosted” look. Filling it can be done quickly as it does fill from the top. What’s great is that the Blotto Mini RTA Tank does feature the same knurling, so taking the tank apart, and filling is super easy.
Just like the original, this one does have a unique build deck. What’s great about it is that you can use both single coil or dual coil builds. This gives you plenty of options to try out. With its overall design, installing coils are a breeze too! It does feature the same 242-degree airflow system, providing you with an incredibly smooth draw. You’ll get plenty of flavors too as the air travels from the bottom, and hits the coil directly. Lastly, you can fully adjust the airflow by simply twisting the base of the tank. If you were a fan of the original or looking for a new, slightly smaller rebuildable tank, the Blotto Mini RTA is one to check out. With its amazing airflow and deck design, it’s a winner.
You may also like: harga cartridge rpm 80
What Are The Highlights Of Hotcig Marvel 40 Kit?
Hey guys. Have you ever used the Marvel 30W Kit by Hotcig? This time let’s check out their Marvel 40 Mod Pod Kit which is the followup to its predecessor. Don’t miss out on it if you’d like to try it out.
Hotcig Marvel 40 Kit has dimensions of 91mm x 39mm x 20mm and is available in 7 different colors, all of which have space or psychedelic-style patterns. For durability, the lightweight chassis is made from zinc alloy and each pod from food-grade PC to ensure healthy vaping. And, the Marvel 40 works with a 1200mAh battery that permits 40 watts of power in either variable wattage, bypass, or custom DIY mode.
Moreover, the Marvel 40 pods hold 2mL of e-liquid, which is actually very little compared to competing devices in the vape marketplace. Inside each pod, there’s a 0.4ohm mesh coil that is compatible with high nicotine and standard e-liquids. The Hotcig Marvel 40 pod kit is also configured with adjustable airflow control on each coil, so you are definitely going to achieve the vaping-style you enjoy.
You may also like: beli ohm aio
Is VOOPOO Argus GT Mod Worth Buying?
Hey guys. This time I’m gonna introduce the Argus GT Mod by VOOPOO. It might be a good alternative if you are looking for a durable and powerful vape mod, let’s dive in for more details.
VOOPOO Argus GT Mod is lightweight and has a more ergonomic shape that makes it feels great in the hand. It comes with an outliner frame and leather or fabric wrapped backing which feels and looks great. The fire button is a basic rectangle with an indentation, and it is placed at the front of the mod above the screen. Below the screen are the up and down buttons and on the side behind a rubber plug is the USB-C port. It features a large color screen that’s easy to see and clear and very bright. Much nicer than the ones we have seen on the Drag line lately. I didn’t see a size listed, but it’s likely a 0.96-inch screen.
The Argus GT Mod has some toned-down options from older VOOPOO mods. You have RBA Mode (blue/R) which is your basic watt mode with no preheat options. Then there is Smart Mode (yellow/S), which is watt mode where it auto sets the wattage based on resistance and won’t let you put it too high, and Temp Control mode for Ni200, Ti, SS. There’s no TCR mode, but you can adjust the TCR in the preset modes. Also no preheat options, volt mode, or power curves like they had in the past. Odd that they would take those out, but not a big deal to me.
You may also like: harga harga vaporesso target pm80
Is Eleaf IStick Kiya Kit An Ideal Choice For MTL Vaping?
Hey guys. This time let’s look at the iStick Kiya Kit by Eleaf, it is an ideal device for MTL or RDL vaping. Here we go!
Eleaf iStick Kiya Kit consists of the iStick Kiya Mod and the GS Juni Tank. Designed to be ultra-portable, the mod measures 35.5mm x 25.8mm x 57.2mm and looks modern with round corners and beautiful lines. However, the miniature size limits the output to 50W, but the minimum resistance capability is very low at 0.05ohm, so you will be able to use pretty much any low wattage atomizer in the marketplace today.
Powering the iStick Kiya is a 1600mAh internal battery that will allow for long vaping times. The cell is recharged by plugging the unit into any wall outlet with a USB cable. The charging process concludes very fast since the system utilizes a 2A current and a temperature protection system ensures it’s safe. The USB port is also used to update the mod in case Eleaf releases new firmware. With available modes that include power, temperature control (Ni, Ti, SS, TCR), and bypass, this mod is quite versatile. On the front of the mod, there’s a newly designed 1.45" color display that shows vape data in an organized way and is bright. The menu includes indicators such as current resistance, current time, power, amperage, a battery bar, and more.
The GS Juni Tank is a tiny little 20mm atomizer with a bottom adjustable airflow. Now, lack of grip on the airflow ring means I find myself having to literally unscrew the atty from the mod when I want to adjust my airflow. When fully open, 2 x 5mm slots provide a good restricted lung hit, along with the needlepoint DL airflow holes, which can be closed off until just one of three is visible, providing one of the nicest restricted MTL hits you could possibly ask for. The Juni has a 2ml capacity, with ELeaf branding on the glass, a thin SS top cap with a removable drip tip that’s the right thickness for either an MTL or a restricted lung hit.
You may also like: beli smok alike pod kit
Is RELX Nano 2 Disposable Pod Worth Buying?
RELX is famous for their vape disposable devices with amazing flavors and extreme quality. This time let’s look at their Nano 2, you may give it a shot if you like.
RELX Nano 2 has been rigorously tested for flavor and quality of vapor and has been improved from the first NANO device that came out. All RELX Nano 2 are pre-filled with 1.35ml salt nicotine e-liquid and come with the best selling award-winning RELX flavors. The nicotine strengths of the e-liquid are either 30 or 50 depending upon the flavor that you choose, this can cater to the needs of most vapers. Powered by a built-in 280mAh battery, the RELX Nano 2 allows approximately 300 puffs, not very bad for devices with such a battery capacity.
The best feature of the RELX Nano 2 is the ease of use. You do not need to charge it or fill any e-juice and can throw it when finished, so it is always ready to be used once opened. Helps all those people who move around or traveling and do not have to worry about any e-liquids or charging ports, just carry some with you whenever you need it. All in all, the RELX Nano 2 is an ideal choice if you are looking for a portable and easy to use pod system device for vaping on the go!
You may also like: harga aegis pod system
Complete Guide To The Uwell Caliburn G Kit
Hey guys. Have you ever used the Caliburn Kit by Uwell? This time let’s look at their Caliburn G which is a follow up to the original Caliburn. It will be available in the gearvita.id murah vape shop soon, don’t miss out if you like.
Uwell Caliburn G Kit is the upgraded version of the much-admired Caliburn. Powered by a 690mAh built-in battery, with a 15W max output, the Caliburn G keeps to the same pocket-friendly, stylish form factor as its predecessor. A removable coil design as well as a dual airflow system allows users to configure vaping styles in an eco-friendly manner. Equipped with a lightweight design, the Caliburn G can fit easily into pockets with a discreet yet durable design. Clicking the firing button 5 times will lock and unlock the device for a secure process.
By simply inserting the pod into the device in different positions, users can alter the inhale with a restricted DTL vape and an MTL inhale possible. The 2ml Caliburn G pods keep the same simplicity as the device, with a practical top-fill method providing ease of use whilst also greatly reducing the chance of leakage. Installing and replacing coils is equally as easy, with a 0.8ohm mesh coil and a standard 1.0ohm coil to choose from. We recommend pairing both of these coils with high PG e-liquids of 50% and above for best performance.
You may also like: beli smok x pozz
What Are The Advantages Of Freemax Autopod50 Kit?
In my impression, Freemax has launched loads of great vape devices. And this time, they are back with their Autopod50 pod vape kecil kit which features the world’s first double vape coil system. Here are more details about it.
Autopod 50 Freemax is powered by a built-in 2000mAh battery and the wattage can be set in the range of 5-50W. Charging takes only about 80 minutes via a 2A Type-C USB port while firing occurs within 15ms. Navigating and changing settings is also quite easy thanks to an easy and multifunctional display screen and two adjustment buttons. On the screen’s menu, you will see the total number of puffs taken, puff time, current wattage, atomizer resistance, current-voltage, and a battery bar. In addition to setting the power output, there are two sub-menus in which you may change your preference for timeout and reset the puffs.
Each Autopod50 pod can hold 4mL of e-juice and is refilled via a bottom juice port. Moreover, it features a brand new coil system: Coiltech 4 which is outfitted with tea fiber cotton and military-grade mesh heating elements to provide the best possible vapor production. And, thorough testing proves that these mesh coils will last up to 30 or 40 refills before a replacement is needed, thus saving you a bundle. There are 2 different coil options to choose from: the AX2 0.5ohm Mesh coil (15 to 35W) or the AX2 0.25ohm Mesh Coil (30 to 50W), both of which are included in the kit.
You may also like: harga xtra pod
The Follow Up To Battlestar Baby-Smoant Charon Baby Kit
Hey guys. Do you like the Battlestar Baby Kit by Smoant? If yes, then you may also wanna try the follow up to it– Charon Baby Kit. Let’s dive in for more details.
Smoant Charon Baby Kit is built with innovative CPR technology, which provides a high-quality glossy finish that not only looks amazing but is water-resistant and leaves no fingerprint trace. Powered by a built-in 750mAh battery and driven by the ANT Chip, it is draw-activated and has a maximum output wattage of 15W. Charges are done by way of a Type-C USB port on the bottom of the device, and there is an LED indicator light on the side to show the battery level. For safety, Charon Baby has a range of safety features, including low voltage protection, short-circuit protection, 10s over-time protection, over-heating protection.
As for the pod cartridge, it is refillable via a side filling port and can hold up to 2ml of e-juice. To meet different vaping needs, the pod comes with a pre-installed 0.6ohm mesh coil and a 1.2ohm regular coil in the kit. Since these coils are replaceable, it’s no need to change a new pod cartridge when they burn out. At last, the airflow is not adjustable on this device. But for its price, this might be forgiven. All in all, the Charon Baby is not too bad as a versatile device for both MTL and DTL vaping.
You may also like: beli vaporesso osmall pod