What Are The Features Of Vandy Vape Kylin M AIO Kit?
Hello guys. Lately, Vandy Vape has just released the latest Kylin M AIO Kit. In the following, I’m gonna make a detailed introduction to this pod vape. Don’t miss out on it if you like.
Vandy Vape Kylin M AIO Kit is quite small for a 70W pod system. With 4 different color options, the panels look incredible. On the inside, the PCBA circuit board is waterproof to prevent damage from dust or water. Technically, it also does not disappoint. In fact, there are three different modes including VW, VV, and TCSS which permit a thorough and versatile vape experience. Power comes from a single 18650 cell stored behind one of the panels which also hides a small display screen, two adjustment buttons to navigate the menu, and a type-C charging interface. Finally, a multitude of safety protections prevents dangerous operations while vaping on the Kylin M AIO.
What’s unique about the Kylin M AIO is that you may use it with either a 2.5mL pod that works with pre-built coils or a 5mL cartridge with a build deck for DIY fun. The package includes both pods and a number of different coils, wire, and DIY tools. Each pre-built pod comes with a pre-installed 0.3ohm single mesh that fires in the range of 35 to 45 watts, while the Kylin M RBA pod works with single mesh or standard wire. To top off the juice reservoir, all you do is open a rubber stopper that hides a decent-sized e-liquid port.
You may also like: harga osmall pod
The Wonderful Aegis Boost Pod Kit from Geekvape
Geekvape enters the pod mod fray with a revision of its popular Aegis design, retaining the line’s signature shockproof, dustproof, and waterproof properties while making the coil and power profile suitable for pod-like performance.
Aegis Boost boasts a large internal battery with a capacity of 1500mAh, regulated by the AS Chip’s suite of performance and safety features. The AS Chip keeps its near-instantaneous firing speed and is capable of delivering 5-40 watts of power–sufficient for use with both salt nic and freebase nic liquids (note: we recommend the 0.6ohm coil at a low wattage setting for use with salts).
The pod section offers several conveniences. Coil replacement is nearly plug-and-play, and airflow control is intuitive with a simple dial. Refilling is easy with a top-fill port protected by a silicone stopper.
Geek Vape Aegis Boost 40W Pod Mod Features:
Dimensions - 106.8mm by 39.2mm by 27.7mm
Integrated 1500mAh Rechargeable Battery
Wattage Output Range: 5-40W
Voltage Output Range: 1.0-6.0V
Firing Speed: 0.08s
Zinc-Alloy, Leather, and Silicone Chassis Construction
IP67 Rating - Water, Shock, Corrosion Resistance
Single Intuitive Firing Button
Two Adjustment Buttons
0.42"" OLED Display Screen
3.7mL Refillable Pod - Replaceable Coil
PTGC Food-Grade Plastic Pod
Top Fill System - Silicone Stoppered
Rotating Airflow Control Dial
Plug ‘n’ Play Coil Installation
Press-To-Fit Pod Connection
Over Temperature Protection
Over Current Protection
Short Circuit Protection
Over Discharge Protection
Over Charge Protection
Includes:
1 Geek Vape Aegis Boost Pod Mod
1 0.6ohm KA1 Mesh Coil
1 MicroUSB Cable
1 User Manual
related product: aegis pod kit
Voopoo PnP Pod Tank Preview | Versatile For Kinds Of Uses
Hey guys. This time let’s look at the PnP Pod Tank by VOOPOO. You shouldn’t miss out on it if you like vape atomizers which are versatile for kinds of uses. For vape terbaik, just check gearvita.id.
VOOPOO PnP Pod Tank is a variation of the pod used on the Drag X and Drag S kits. However, you can now buy it on its own and it can be used as a pod or a tank… Basically it has been created due to the PnP range of coils from VOOPOO. This versatile coil range fits most of their recent devices including the Vinci X, Navi, and the MAAT tank included in some of their kits. The PnP coil range (stands for Push and Pull – easy installation) is huge with even an RBA coil so you can DIY your way to a perfect vape.
9 PnP coil options are shown below as you can see plenty of options for every vaping style. The recent release of the Drag S and Drag X kits included this as standard and now VOOPOO has created a standalone version with a 510 base to allow it to be used on standard mods too. The base attaches to the pod and has the airflow adjustment. The Drag S/X kits have the airflow intake and control located on the mod. This is for devices that have no airflow intake such as box mods. To refill remove the base to access the bottom fill port.
You may also like: beli pozz x
What Are The Advantages Of Augvape Merlin Nano MTL RTA?
Hey guys. For RTA vape, which kind do you like best? This time I’m gonna introduce the Merlin Nano MTL RTA by Augvape. Just give it a shot if you like.
Augvape Merlin Nano MTL RTA is designed specifically for mouth to lung vaping and has a few features making it quite unique even when comparing it to some of the Best RTAs. Firstly, it sports a base diameter of 18mm, so it’ll be a great match for your small mods. However, a 22mm beauty ring is included if you wanted to make the base just a bit larger to match other devices. Secondly, it features an adjustable airflow system using inserts. Included in the packaging, you’ll receive three different airflow inserts.
One features a 1mm airflow hole, the second features a 1.2mm, and the last has dual 1mm airflow holes. The Merlin Nano RTA does have a 2ml e-liquid capacity, but a bubble tank is included if you wanted to increase the capacity to 3.5ml. Lastly, it features a traditional bottom fill system and a gold plated 510 connection. All in all, if you’re a fan of mouth to lung vaping, and looking for a new and unique RTA, then this is the perfect deal for you!
You may also like: osmall pod indonesia
Guides To The Think Vape Thor AIO Kit
The Latest Augvape VX217 Kit From Augvape
Hi vapers, today I’ll introduce the lastest starter kit from Augvape, its name is Augvape VX217 Kit.
Augvape VX217 VW/TC Starter Kit, upgraded from VX200, is first mod that can reach 12W, suitable for high ohm coil. Augvape VX217 box kit consists of VX217 mod and Intake Sub Ohm Tank. Augvape VX217 box mod, made of Zinc alloy, is powered by dual 18650/20700/21700 batteries with max 217W output. Augvape VX217 features 1.3 inch color screen with 240240RGB resolution to offers hundreds of color theme options. The UI simulates the car dashboard can show vape time, mode, wattage, voltage, resistance, batteries life. Augvape VX217 mod supports VW/ VV/ Bypass/ TC modes to meet needs. Augvape Intake Sub Ohm Tank adopts top to bottom airflow, top refill with leakproof design and innovative clapton mesh coil for better flavor and longer lifespan.
Parameters:
Augvape VX217 Mod
Size: 80 49* 42mm
Material: Zinc Alloy
Battery: dual 18650/20700/21700 batteries(not included)
Output: 5-217W
Voltage range: 0.5-12V
Display: 1.3 inch color screen
Modes: VW/ VV/ Bypass/ TC modes
Resistance range: 0.05-3ohm
Charging current: 1.2A quick charge
Augvape Intake Sub Ohm Tank
Size: 25* 46mm
Thread: 510
Features:
First mod that can reach to 12W, suitable for high ohm coil
Powered by dual 18650/20700/21700 batteries with max 217W output
Minimalist design with spin button and big fire button
1.3 inch color screen with 240*240RGB resolution to offers hundreds of color theme options
Excellent UI simulates the car dashboard to show vape time, mode, wattage, voltage, resistance, batteries life
Supports VW/ VV/ Bypass/ TC modes
Simple circuit design and less wire, last much longer
Top to bottom airflow
Top refill with leakproof design
Innovative clapton mesh coil for better flavor and longer lifespan
Packages:
1* Augvape VX217 Mod
1* Augvape Intake Sub ohm tank
1* Type-C cable
1* Battery adaptor sleeve
1* Bubble glass
2* clapton mesh coils
1* O-rings
1* User manual
1* Warranty card
1* Desiccant
Guides To The Think Vape Thor AIO Kit
Hello guys. This time let’s look at the Thor AIO Kit by Think Vape. If you are looking for a cheap but decent vape kecil kit, I think it will be a good choice. Ok, here we go!
Think Vape Thor AIO Kit requires a single high drain 18650 battery for operation. Additionally, it does have an impressive 80W max output. All of this available power is due to its proprietary chipset. Not only will you get 80W out of this compact device, but there’s a ton of safety features built in.
The materials used to construct this device are ABS and PC, which makes it extremely lightweight, even with an installed battery. Furthermore, it’s shaped perfectly, so the Thor AIO Kit is super comfortable to hold. Like we’ve seen before with their past devices, this one features a graffiti art style. On the front, you’ll notice the display screen which will display your wattage output, current battery life, coil resistance, voltage output, and even a firing timer. Underneath is where you’ll find the micro USB port and wattage adjustment buttons.
As for pod, it can store up to 3ml of e-juice. Filling it can be done from the side. What’s great about the Thor AIO is that it is compatible with the replacement coils that were used with the Think Vape Zeta, and even the RBA section and pod cartridges too. However, you do receive to mesh coils inside of the packaging. Lastly, you can control the airflow from the bottom of the coil head. Think Vape has brought another awesome device to the market that not looks good, but won’t cost you much at all. At under $16, it’s a complete steal!
You may also like: beli alike kit
Guides To The Digiflavor Drop RDA 24mm
Hello guys. This time we’ll be covering the Drop RDA by Digiflavor. It is really a good match for liquid freebase enak, so don’t miss out on it if you like. Here are more details.
Digiflavor Drop RDA is the latest collaboration project between Digiflavor and The Vapor Chronicles, delivering a 24mm diameter rebuildable dripper with a unique four-post build deck with horizontal multi-air slots in T-Shape design. Leveraging the manufacturing prowess of Digiflavor and paired with design inspirations from The Vapor Chronicles, the DROP 24mm RDA is constructed with new design elements and dynamic functionalities. The build deck of the DROP RDA is fully gold-plated for superior connectivity, integrating a four-post, single terminal per post design for a user-friendly configuration.
Coil leads are set into each terminal and tightened via side-tension flathead slotted screws. Due to the design of the posts, the design frees up build space to accommodate large coil structures with the added benefit of the conical top cap to maintain a flavor-focused structure. Airflow enters the structure through a series of 12 air holes on each side of the chassis, implementing a T-Shape design that is fully adjustable with the knurled top cap. The DROP RDA comes with a pair of 810-fitted wide bore drip tip options, with the option of 510 drip tip adapter for customizable preference. Setting itself for success with a plethora of useful functionalities while catering to high-performance experience, the DROP RDA is bound to be a successful product for the rebuildable dripper segment.
You may also like: artha mod pod indonesia
What Are The Advantages Of Lost Vape Drone DNA250C Mod?
Hey guys. Do you like vape devices by Lost Vape? This time I’m gonna introduce their Drone DNA250C Mod. It will be a good choice if you are looking for mod terbaik. Here we go!
Lost Vape Drone DNA250C Mod is set to enter the squonk-ready segment in spectacular fashion, presenting a beautifully crafted chassis design Lost Vape have come to known for along with the integration of Evolv’s DNA 250C Chipset. The structural chassis of the Drone BF DNA250C is inspired by the core foundation of the acclaimed Triade apparatus, featuring a poly-angular frame with futuristic lines and elegant combination of high-end materials and accenting for a visually stunning aesthetic. The Drone BF implements a cutout located at the base of the chassis that houses the squonk bottle for ergonomic integration and convenient access. The magnetizes battery door supports dual high amperage 18650 batteries, while simultaneously complete the sturdy and appealing aspect of the device.
Another benefit of the design includes a centered 510 connection, allowing for a wide range of atomizer sizes while preventing over-hang. The Drone BF utilizes Evolv’s premier DNA 250 Chipset with down-throttled power, featuring an incredible 97% output efficiency rating, tremendous range from 1 to 167 watts, full temperature control with a wide range of heating elements, and coupled with Escribe software for the ultimate technology that combines efficiency, capability, and range. Presenting an unmatched combination of the latest output technology with sophisticated chassis designs that supports squonk-ready atomizer, the Drone 250C Mod is the state-of-the-art device for power enthusiasts and advanced users.
You may also like: ohm vape aio indonesia
The Great Vandy Vape Kylin M RTA
Hi guys, today I’ll introduce the atomizer from Vandy Vape, its name is Vandy Vape Kylin M RTA.
Discover the KYLIN M RTA by Vandy Vape, integrating a spring-loaded clamp-style build deck for mesh configurations and honeycomb top-airflow control to create a rebuildable tank that is sure to take the vape industry by storm. Ergonomically crafted with a newer chassis design compare to the previous Kylin series, the Vandy Vape KYLIN M has a maximum capacity of 4.5mL with threaded top-fill. The Kylin M 24mm RTA continues the modern mesh-style coil configuration, with an added ceramic block within the build deck. Each mesh sheet is conveniently side-secured via Phillips screws, activating the . dual clamps on each side of the terminal to ensure a strong connection. The mesh heating element heats rapidly and evenly, vaporizing the salt-nic liquid within the cotton wick that is mounted on the spring-loaded ceramic support, maintaining ideal contact for efficient vaporization. On the top section of the structure sports a twenty (20) airholes with honeycomb style intake that travels down into the central atomizer chamber for exuberant cloud production while maintaining high-level flavor recreation.
Vandy Vape KYLIN M RTA Features:
24mm Base Diameter
26mm Diameter at Widest Point
3mL Standard Juice Capacity
4.5mL Expanded Bubble Capacity
Pyrex Glass Reinforcement
Superior Stainless Steel Construction
Unique Clamp-Style Build Deck - Dual Clamp-Style
Side-Secured via Phillip Screws
Spring-Loaded Clamp Mechanism
Dual Bored 20-Multihole Top Airflow Control Ring
Unique Single Mesh Heating Element Layout
Threaded Top Fill System
Detachable Structure
810 Widebore Resin Drip Tip
510 Connection
Available in Stainless Steel, Matte Black, Gunmetal, Blue, Frosted Black, Gold, Rainbow
Includes:
1Kylin M RTA
20.2ohm Mesh Wire
20.15ohm Mesh Wire
2Agleted Cotton
14.5mL Capacity Glass Tube
1810 Resin Drip Tip
1Accessory Bag
1User Manual
Guides To The VGOD Pro Mech 2 Kit
Hey Guys. Have you used vape kits powered by mod mechanical? This time we’ll be covering the VGOD Pro Mech 2 Kit which is such a device. Here we go!
VGOD Pro Mech 2 Kit is the latest vape device by VGOD, specially designed for serious vapers, flavor-chasers, and trick benders. Including Pro Mech 2 Mod and Elite RDA Tank. Features an elegant design with a CNC machined Delrin comfort touch chassis for great hand feel. Powered by a single 18650 battery, utilizes the consistent firing of the TriCon switch system, the PRO Mech 2 will deliver nice flavor and great performance. Pair with VGOD Elite RDA Tank, features 24mm diameter, deep build deck for easy building, and bottom airflow system to offer excellent vapor and nice flavor. The Pro Mech 2 Mod is a tube-style mechanical mod that has a grenade-like appearance, won’t slip, and is ergonomic thanks to multiple-cutting edge technologies. When firing, this device will instantly activate, without delays.
Boasting unique aesthetics and innovation, the PRO Mech 2 introduces a CNC machined Delrin comfort touch chassis and the consistent firing of the TriCon switch system. The PRO Mech 2 delivers hard hitting performance while maintaining comfort and dependability.
In this kit, there’s also the Elite RDA that measures 24mm x 33mm (without the pin), is made with high-grade materials, and features a beautiful VGOD engraving. At the bottom, you will find a hybrid compatible protruding 510 pin that is also gold plated for best conductivity. The dual post deck has 2mm wide wire holes, finger tight nuts (Phillips or flat head), and 11mm post hole spacing. Underneath, the juice well is 9.25mm deep and can hold 2ml of e-liquid.
You may also like: harga vaporesso xtra
A Must-have For DTL Vaping | Wismec Reuleaux DNA250 Mod
Hello guys. Recently found a decent box mod by Wismec named Reuleaux DNA250. This time I’m gonna make a detailed introduction to it. Here we go!
Wismec DNA250 Mod marks the return of the ultimate performance flagship device from Wismec, delivering the highly appraised chassis of the Reuleaux series with the integration of Evolv’s DNA 250 chipset. The structural architecture implements similar aesthetics from its predecessor, featuring a polygon-angular frame with distinct and elegant accenting, especially with the Limited Edition Bronze colorway. The classic three-button control face features triangular adjustment buttons and an oversized firing button, laid out to surround the OLED display. The Reuleaux DNA 250 is powered by three 18650 batteries run in series (sold separately) and are loaded through the magnetized battery access door.
The return of Reverse Polarity System with the installation of stainless steel 510 threads and spring connector vastly improves the operational usage of the device. The Wismec DNA250 integrates Evolv’s most powerful chipset, featuring incredible 97% output efficiency rating, tremendous range from 1 to 250 watts, full temperature control with a wide range of heating elements, and coupled with Escribe software for the most customizable and upgradeable output capability. Designed to combine top-tier output capability with premier ergonomics of high-end devices, the Wismec Reuleaux DNA 250 TC Box Mod is geared for performance enthusiasts.
You may also like: beli smok alike
The Vape Watch Uwell Amulet Kit
Hi guys, today I’ll introduce an interesting vape to you. It’s not only a vape but also a watch, and its name is Uwell Amulet Kit.
The Uwell AMULET Pod System Vape Watch is the first vape kit that you can wear around your wrist. That’s right, the Uwell AMULET Pod System integrates a vape and watch all in one. The Amulet Vape Watch features a 370mAh rechargeable battery, 2mL refillable pods with draw-activated mechanism, and the ergonomic wristband with the ability to showcase Date & Time. Formed from durable materials, the AMULET is in possession of an integrated 370mAh rechargeable battery that can last throughout the day. Built in a watch strap fashion, the AMULET Pod System remains inconspicuous as it takes the form of a watch and strap combination. Relying on a draw-activated firing mechanism, the AMULET is kept relatively button-free, keeping the exterior surface and layout clean and clear from cluttering buttons. Equipped with a responsive touch screen, the AMULET 10W Pod System can accept the 2mL eLiquid pod in a snap-in style connection while relaying information like day and time to the user from the display screen.
Features
Uwell Amulet Pod System
Color/Finish: Black
Dimensions – 47.7mmm by 37.58mm by 17.2mm
Integrated 370mAh Rechargeable Battery
Max Wattage Output: 10W
Coil Resistance: 1.6ohm
PCTG, Silicone, and Poly Carbonate Chassis Construction
Draw-Activated Firing Mechanism
OLED Display Touch Screen
Touch Button
Release Switch
Watch Strap Carrying Case
2mL Pod Capacity
Integrated 1.6ohm Coil
Bottom Fill System – Silicone Plug
Snap-In Pod Connection
Over Vape Indication
Open-Circuit Protection
Short-Circuit Protection
Low Power Indication
Over Temperature Protection
What’s Included
1pc Uwell Amulet Pod System
1pc Uwell Amulet Pod Cartridge
1pc MicroUSB Charging Cable
1pc User Manual
Authenticity Code on Retail Box
You may also like hero 57 liquid for the product.
What Are The Selling Points Of Hotcig Marvel Mod Pod Kit?
Hey guys. This time let’s look at the Marvel Kit by Hotcig. You may give it a shot if you are looking for a reliable vape mini kit. Here we go!
Hotcig Marvel Kit is a beautiful piece of vaping technology, integrating a 1200mAh rechargeable battery, various operating and firing modes, and can be used with coils from the Marvel coil series, utilizing a 0.6ohm mesh or 1.2ohm regular coil for dense clouds of flavor oriented use, respectively. Constructed from durable zinc-alloy, the chassis and frame of the Marvel Kit is a lightweight but durable brushed silver finish. Underneath a sliding panel, the Marvel hosts a 2mL refillable pod with a threaded top fill system that also locks the sliding pod in place.
In addition, mounted underneath the drip tip is a rotating airflow control ring with light knurling to make adjustments easier. Within the chassis is a 1200mAh rechargeable battery to help fire the Marvel with its various modes and outputs, ranging from 1-30W in Power Mode, Bypass Mode, and a custom DIY mode for those that like to tailor their vapes for more individual and personal usage. Finally, the Hotcitg Marvel offers two coils to use within the 2mL refillable pods, a 1.2ohm regular coil, and 0.6ohm mesh coil variant.
You may also like: harga vaporesso pm80
Is Hotcig Kubi Stick Vape Pen Kit Worth Buying?
Hello guys. This time I’m gonna introduce the Kubi Stick Kit by Hotcig. If you are looking for decent vape pen kits for your liquid salt nic terbaik, then you shouldn’t miss out on it. Here are more details.
Hotcig Kubi Stick Kit is a pen-style device with a slim size that can be comfortably held in the hand, giving you an excellent feel. Moreover, there is a dustproof cap included in the kit that allows you to use the device more cleanly. Powered by a built-in 1500mAh battery, the Kubi Stick has an output voltage range of 3.2-4.2V and supports three levels of working mode (High, Middle, Low). To adjust the output, you just simply click the square fire button. The LED light surrounding the button will light up in different colors to show which level the device is on, green means High, blue means middle, and red means low.
As for the atomizer, it can hold 2ml of e-juice. To refill it, you just screw off the top cap to reveal the filling ports. The heating element included in the kit is a 1.2ohm coil head, which is very suitable for e-liquids with high nicotine content. Additionally, the airflow is adjustable via a ring at the base of the atomizer. Just rotate the ring clockwise to close the airflow hols one by one, so that the air intake can be adjusted from fully open to single. All in all, the Kubi Stick Kit is perfect for beginners who want to start vaping.
You may also like: beli artha mod pod
The Advken Manta MTL RTA From Advken
The Advken Manta MTL 24mm RTA is an innovative mouth-to-lung rebuildable atomizer tank, featuring a dynamic single coil build deck configuration, auxiliary bottom airflow control, and a threaded top-fill system. The Manta MTL RTA comes with the standard 2mL glass tube, but can be upgraded to a 3mL bubble glass tube that is included. The build deck is expansive and features a gold plated finish to ensure the best possible connection and conductivity. This connection makes the Manta MTL RTA very reliable. Furthermore, the knurled and threaded top fill system is easy to access and grip, turning to reveal dual fill ports to accept today’s most popular eJuice for a long and satisfying vape experience.
Advken Manta MTL RTA Features:
24mm Diameter
3mL Standard Glass Tube
Superior 304 Stainless Steel Construction
Spacious Build Deck
Gold-Plated Two-Post Build Deck
Top Secured via Flathead Slotted Screws
Single Coil Configuration
Triple Adjustable Bottom Airflow Control Ring
Side Flow Air Intake on Posts
Threaded Top-Fill System
510 ULTEM MTL Drip Tip
510 Standard Connection
Includes:
1 Manta MTL RTA
1 Cleaning Cloth
1 Spare Glass Tube
1 Alien Screwdriver
1 Accessories Bag
You may also interested in murah Oumier Wasp Nano RTA
What Are The Features Of Advken Manta MTL RTA?
Hello guys. Have you used the Manta RTA by Advken? This time we’ll be covering the MTL version to it– Manta MTL RTA, which will be available in the gearvita.id toko vape murah soon. Here we go!
Advken Manta MTL RTA looks just like the original Manta RTA, but now has a tighter airflow, and the deck is geared for single coil builds. It still features the same Manta logo and Ultem drip tip, but with an appropriate 510 mouthpiece. Measuring 24mm in diameter, the tank has a 3ml maximum capacity with the bubble glass, 1.5ml less than the original. The European edition only includes the straight 2ml glass for TPD compliance. Considering it is a single-coil mouth to lung device, 3ml is not bad, but a bit less than the average MTL tank.
The build deck is expansive and features side-air intake holes to enhance flavor. Furthermore, the knurled and threaded top fill system is easy to access and grip, turning to reveal dual fill ports to accept today’s most popular e-juice for a long and satisfying vape experience. At last, the bottom airflow system works the same as before but provides a much tighter draw suitable for MTL vaping or restrictive lung hits. All in all, the Manta MTL RTA is no doubt a good alternative for MTL lovers.
You may also like: harga nord 2
Is Hotcig Hades BF RDA Worth Buying?
Hey guys. Recently, Hotcig has launched quite a few vape devices. This time let’s look at their Hades BF RDA. Don’t miss out on it if you like. Here are more details.
Hotcig Hades RDA is a phenomenal addition to the rebuildable market, featuring a spacious build deck, substantial airflow, and an ultra-lux finish with minimalistic designs. Measuring in at 24mm, the large build deck of the Hades RDA features a quad post design suitable for either a single or dual coil configuration. Each post contains a single terminal opening that is top secured via flathead screws. Between the posts sit a dual slotted inlet for airflow that is drawn from the dual external side slots measuring in 5mm by 2mm; aimed directly underneath the coil.
The dual directional airflow channels are great for flavor and can be adjusted to be as free or restrictive as desired. Furthermore, the Hotcig Hades RDA is built in a minimalistic fashion, featuring a clean and simple exterior bathed in 24k gold, while the build deck is spacious and is not cluttered or restrictive. The top cap has an internal cone shape within that condenses the flavor into a single exit point to deluge the tastebuds in the flavor of today’s popular vape juice. Just give it a shot!
You may also like: beli vinci air
The Latest Demon Killer Fod Pod System Kit
Hi guys, today I’ll introduce the latest pod system kit from Demon Killer, its name is Demon Killer Fod Pod Kit, it’s a really shiny vape.
Fod Kit is a pod system kit that comes with ergonomic design, compact size, and 41 shiny elements on appearance. It is really convenient for you to carry around. It consists of a 2ml pod cartridge and a 580mAh internal battery. As you can see, with the Type-C fast charging port, it is driven by the battery which can fire up to 11W max output power. And it provides multiple protections to ensure your safety, such as Low / High Resistance Protection, Overheat Protection, Short Circuit Protection, and Over-charge / Over-discharge Protection. Besides, as for the pod, it holds 2ml e-juice with side refilling design. And after each e-juice injection, it allows you to enjoy about 350 puffs. What’s more, it is compatible with 1.0 ohm coil for better flavor and dense cloud.
Parameters
Material: PCTG, Zinc Alloy
Size: 23mm15mm112mm
Net Weight: 94.5g
Battery Capacity: 580mAh
Juice Capacity: 2ml
Filling: Side Filling System
Maximum Wattage: 11W
Coil Resistance: 1.0ohm
Charging Port: Type-C
Protections: Low/High Resistance, Overheat, Short Circuit, Over-charge/Over-discharge
Color: Black
Demon Killer Fod Pod System Kit 580mAh comes with
1 x Fod Battery
1 x Type-C Cable
2 x 1.0ohm Fod Refillable Pod
1 x User Manual
You may also like: terbaik JVS liquid
Full Guides To The Advken Orcas MX Cube Kit
Are you a fan of vape devices by Advken? This time I’m gonna introduce their Orcas MX Cube Kit, it will be available in the gearvita.id rokok elektrik online store soon. Ok, let’s dive down for more details.
Advken Orcas MX Cube Kit features a very similar design to many new devices or AIO kits we’ve seen recently, especially in comparison to the SMOK RPM40. However, what’s great about this one is that it is powered by a single high drain 18650 battery. With that being said, it can deliver up to 80W of power, more than what many traditional pod vapes can provide. There is a USB Type-C charging port available as well if you’re in need of a quick charge. Also, the MX Cube Pod Kit can fire down to 0.1 ohms. On the front of this pod device, it does have a huge LED screen that clearly displays your vaping information. Right above that is the firing button, and below is where the adjustment buttons are located.
The pod cartridge does hold a maximum of 4.5ml, which is plenty considering the overall size of the device. It can be filled quickly with its side fill port. In addition, it utilizes replacement coil heads, and there’s two that’s available. The first is a 0.3-ohm mesh coil, and the other is a 0.8-ohm mesh coil. Airflow comes in from the bottom and can be adjusted to your preference. All in all, if you’re looking for another pod mod to add to your collection that offers a replaceable external battery and mesh coils, then definitely check out the Orcas MX Cube Kit.
You may also like: harga cartridge rgc rpm 80
The Hadar RDA 25mm from Myuz
Hadar RDA dripping atomizer is an intricate vaping system Developed by Myuz. It is compatible with two heating modes; Mesh coil; Compatible with top filling and bottom feeding. The Hadar RDA shaped air inlet for compact smooth airflow. It is recommended that you adjust between 35 and 50W, you will get an unprecedented vaping experience with excellent flavor taste!
Parameter
Size: 25 * 41mm
Length: 25mm
Diameter: 41mm
Resistance: 0.15ohm / 0.3ohm
Color: SS, Black, Navy Blue
Standard Configuration
1 * Hadar RDA
2 * Mesh coil
2 * Wire coil
1 * Coil jig
3 * Cotton
1 * User Manual
Features
Exquisite IML Process, mini compact design, easy to carry.
Equipped with massive internal battery for long time vaping
Innovative rotary refilling & Leak-proof design
Adapt newly coil for better flavor, also, it can use GS Air series coils too.
Two kinds of intake airflow
You may also interested in Vandy Vape Capstone BF RDA