Steam Crave Hadron Plus DNA250C Mod + Hadron Mesh RDSA + Pumper
authentic / 12ml / dual mesh deck / w/BF pin / 30mm diameter / 1-200W VW / 200-600’F TC / 2*21700/20700/18650
Details:
Hadron Plus DNA250C Mod
Features:
· DNA 250C Chipset
Replay Mode: Capture the flavor and satisfaction of the “perfect puff”, and provide the same level of performance and consistency for all subsequent puffs.
Watts Boost: Briefly increase the power delivery at the start of firing to reach your desired vapor output faster.
Accurate Temperature Control: By directly measure and limit the temperature of the heating coil, the Hadron Pro DNA250C is able to prevent the coil becoming too hot and provide a much stable performance.
· Firmware Upgrade
· Multiple Protections
Atomizer Protection
Low Resistance Protection
Onboard Reverse Polarity Protection
Short Circuit Protection
Overheat Protection
Low Voltage Step Down Protection
· Max 200W Output: Hadron Plus is able to offer a tremendous range with the maxmium wattage output 200W
· USB Charging
Built-in Onboard Charger
Fast Charging
Pass Through
· Dual 21700 for Long Lasting, Open/Close the Battery Door Easily
Basic Parameter
· Battery: 2*21700/20700/18650 (Battery Sold Separately)
· Input Voltage: 6-8.4V
· Battery Voltage: 3-4.2V
· Output Voltage: 0.2-8V
· Power Range: 1-200W
· Current Range: 0.5-30A
· Max Charging Current: 3A (2A Suggested)
· Temperature Range: 200-600’F
· Coil Resistance Supported: 0.1-3ohm
· Coil Material Supported: Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90
· Screen Pixel: 0.9’’ (80*160 pixel) full color TFT
· Body Material: Aluminum Alloy
Hadron Mesh RDSA
The authentic Steam Crave Hadron Mesh RDSA vape atomizer is made of high quality stainless steel and combines comfortable operation with an outstanding vaping experience. The Hadron Mesh RDSA can be used both as a classic dripper and for squonking (with the including 510 squonk pin). The Hadron Mesh RDSA is equipped with a comfortable and spacious dual mesh deck with space for 2 mesh strips.
· Ergonomic 810 wide-bore resin drip tip
· Material: Stainless Steel + PEEK
· Supports medium to high wattage vaping
· Side and bottom adjustable airflow
· Comfortable dual mesh deck for 2 mesh strips
· Practical mesh fixation using clamps and side screws
· Generous liquid tub
· Infinitely adjustable top to side airflow with honeycomb air inlets
· For DL and RDL vapor behavior
· Compatible with Pumper Kit (not included)
· 510 threading connection
· 30mm overall diameter
Pumper
The authentic Steam Crave Pumper Kit will support Squonking without a squonker mod. The Pumper Kit is perfectly fitting for the in-house hadron and hadron mesh RDSA vape atomizer, but also suitable for all other RDSAs with the corresponding diameter, Steam Crave’s chic pumper with a diameter of 30mm presents itself in the characteristically elegant Steam Crave design made of stainless steel and glass and in two elegant color variants. The Pumper tank holds 12ml and can be filled quickly and easily via a side opening with a tight-fitting metal screw plug. On the opposite side is the pump button, which is also made of stainless steel and which activates the manual pump function.
· High-quality pumper kit for “squonking”
· Developed for the Steam Crave Hadron / Hadron Mesh RDSA Vape Atomizer
· Compatible with a variety of other RDSAs
· Elegant Steam Crave design
· Material: stainless steel + glass
· Diameter: 30mm
· Standard 510 overhead connector for RDSA
· Standard 510 thread on the bottom for mod
· Compatible with almost every mod with a 510 connection
· 12ml tank capacity
· Comfortable side fill
· Manual pump function via metal button on the side
· Fast and safe liquid delivery